• February 23, 2025, 09:02:36 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS-5300 Reboots  (Read 3352 times)

doc10101

  • Level 1 Member
  • *
  • Posts: 1
DCS-5300 Reboots
« on: June 20, 2011, 08:11:28 AM »
Have several DCS-5300 cameras (firmware 1.06) and randomly the cameras will reboot.

D-Link says to set to factory default, but that is not physically possible.
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: DCS-5300 Reboots
« Reply #1 on: June 20, 2011, 11:27:11 AM »
Quote from: doc10101 on June 20, 2011, 08:11:28 AM
D-Link says to set to factory default, but that is not physically possible.

Although the web interface has an option to restore the factory defaults, you can also perform this procedure manually if you are unable to access the web interface:

  • Insert the paperclip or other tool and press on the button continuously.
  • Wait for the LED on the front of the camera to blink red and green and hold the button through two cycles of
    blinking (about 5-7 seconds.)
  • Withdraw the tool after the second cycle of the LED blinking and a factory restore has been completed.
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC