Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[slpip]

When the router operates at 600 kb/s + reset, it should be the WAN setting, do you use auto/10/100/1000 Mbps or 100/1000 Mbps?  You can set the manual uplink speed higher than your ISP speed.  Like I have 15/5 Mbps, I set the uplink at 5500kbps.  I set my RTS/Fragmentation Threshold at 30000.  These can boost up the data transfer speed.  These settings are wired and wireless for WAN upload/download speed.

[woozabi10]

I set it to visible, I am using ethernet on it not wireless, not sure what card they use but my ethernet connection resets it too. The RTS threshold maxes at 2347 so I can't do 3000. I even changed the IPv6 to auto detect, before it was link only. Still no good.

[FurryNutz]

Is this reset happening due to the modems lease time expiring by chance? Ran into this the other day with a 815, turns out the ISP lease time is set to exprire every 59 minutes. They connected directly to the ISP modem with a PC and looked at the ipconfig /all and saw that the acquired date and time and least expired was 59 minutes in which they saw getting disconnected from wired and wireless connections from the router as the router was loosing the WAN IP address least from the modem. This is a ISP issue. There working on getting the least time up'd.

Any chance this could be happening with yours?

We might have another looksee via teamviewer sometime. 

[slpip]

You never mentioned you enabled UPnP and Multicast Streams.  Also, disable the security setting to test it before you reset the security WPA/WEP.  Make sure you have the update network driver for your computer.

[woozabi10]

no lease time not an issue. set upnp and multicast on. i have no issues with my netgear wgr614 v7 so its definitely the 655

[slpip]

DIR655 RevB should disable SP1.

[FurryNutz]

SPI works on my B1 router hand I have had 2.00 and currently 2.03 on this unit with out the resets. And connected to a SM model modem. It's not FW. Either there is a issue between the modem and router, external interferences or a mis-configuration on the router or possible this unit has a problem.

Lets check out the routers web page again once more.

I would recommend if you have a friend, family or neighbor with internet, take this router to there house and connect it up and see if the problem persists. If so then I would return the unit for RMA.

[woozabi10]

Fixed, got a new router. Thanks for all the efforts.

[FurryNutz]

Enjoy.