Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[rocketfox]

hello

i have the DIR 652 close to 655

i hope that sombody can understand my problem.

it looks like the router controll the hole time any IPs . so the sleep mode from my NAS canīt aktivated.
its not good for harddrive lifetime and it cost more energy.

had somebody settigs for me that my NAS can go to sleep mode?

if not one other product from the Dlink family had this option?

[FurryNutz]

Link>Welcome!

• What Hardware version is your router? Look at sticker under router.
• Link>What Firmware version is currently loaded? Found on the routers web page under status.
• What region are you located?
• Are you wired or wireless connected to the router?

There isn't any settings on the routers for handling NAS. The only thing I can think if is that something is accessing the NAS keeping it from sleeping when needed.

Is the NAS set up with a Static or Reserved IP address. We recommend Static for NAS devcies.

[rocketfox]

hello

my router data:Hardware-Version: B1     Firmware-Version: 2.00
i came from germany i canīt finde new firmware for my devise.

the NAS is connected by wire

and i have also a static IP in the router for the NAS

[FurryNutz]

What region are you located?

[rocketfox]

with region u mean my country? i live in germany

[FurryNutz]

Well you can try this FW located here:
http://www.dlink.com/de/de/support/product/dir-655-wireless-n-gigabit-router?revision=deu_revb

If you choose to update, please use this to do itFW Update Process

Let us know if it helps...I'd disconnect all devices from the router that may try to access the router accept for one PC. Ensure that this PC doesn't have any back ground running apps that maybe accessing the router. Camera and Camera capture software can keep the drive running if it's setup and configured in this application.

[rocketfox]

hey i try it

but my 652 donīt accept the 655 firmware

[FurryNutz]

Ya, my bad, sorry about that.

I can't find any FW either for this model router.

I recommend that you disconnect any device from the router and see if something might keep the NAS from sleeping. Then try the NAS disconnected from the router, does the NAS sleep then as well?

hey i try it

but my 652 donīt accept the 655 firmware

[rocketfox]

if i disconnect the the NAS the NAS go to sleep mode.

if i have connectet NAS and DIR 652 and disconnect all other partner i have still the problem

but ( in this time our smartfone connect with the DIR 652)

so my question is if i have no settigs for that i have at all produkts the same problem?

[FurryNutz]

Ya, something maybe incompatible or a configuration issue.

Is there constant LED activity seen on the router or NAS when the NAS is connected on the LAN port? There any LED activity indicators on the NAS?

What model is the NAS? This is a LAN wired NAS correct? Not a USB drive?

[rocketfox]

it is a real NAS connected per LAN

i wont to look if the led from LAN port indicated . i give later feedback about this
(but i think it must be give a signal )

this NAS is :

Shuttle OmniNAS KD20 6TB

[FurryNutz]

Could maybe try a different router to see if similar problem happens. Borrow one from a friend.