• February 24, 2025, 01:40:43 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Loss Of Mapped Drive Connectivity  (Read 4286 times)

kghoops

  • Level 1 Member
  • *
  • Posts: 1
Loss Of Mapped Drive Connectivity
« on: February 21, 2011, 06:01:16 PM »
I've had my DNS-323 for about 2 weeks now.  Everything is setup and working great except for an issue with the drives I've mapped to it on my laptop.

I have 2 drives in the device and a mapping to each drive.  After a certain amount of time, I can no longer access either mapping.  I either get "J:\ is not accessible.  The network path cannot be found" or "Windows cannot access this disc".

I'm using Windows 7.  If I do a scan of the network on the laptop, the DNS-323 device does not show up but I can still get to the configuration page for the device by IP address when this happens.  If I restart the laptop, the drive mappings are fine again.  Is there some kind of setting to prevent this from happening?  Are the drives not waking?

Thanks for any ideas.
Logged

DougsDNS-323

  • Level 1 Member
  • *
  • Posts: 1
Re: Loss Of Mapped Drive Connectivity
« Reply #1 on: December 18, 2011, 03:08:50 AM »
I have the same problem.  Please any ideas?

Using Windows 7.

Using Windows Explorer.

Using three (3) DNS-323 units, but the problem happens only on one of them, the newest one.

Have tried swapping disks between units, but/and the problem stays with the newest DNS-323.

In addition to the messages mentioned, I receive "Location is not available."

Unit can be woken up by logging into via web, and seems to wake up after multiple attempts to access.

***

Topic Summary
Posted on: February 21, 2011, 06:01:16 PMPosted by: kghoops 
Insert Quote
I've had my DNS-323 for about 2 weeks now.  Everything is setup and working great except for an issue with the drives I've mapped to it on my laptop.

I have 2 drives in the device and a mapping to each drive.  After a certain amount of time, I can no longer access either mapping.  I either get "J:\ is not accessible.  The network path cannot be found" or "Windows cannot access this disc".

I'm using Windows 7.  If I do a scan of the network on the laptop, the DNS-323 device does not show up but I can still get to the configuration page for the device by IP address when this happens.  If I restart the laptop, the drive mappings are fine again.  Is there some kind of setting to prevent this from happening?  Are the drives not waking?

Thanks for any ideas.
 

Logged