• February 24, 2025, 08:43:07 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Suggestion: Wireless Mac Address Filtering  (Read 4805 times)

koshia

  • Level 1 Member
  • *
  • Posts: 7
Suggestion: Wireless Mac Address Filtering
« on: February 28, 2010, 01:06:15 AM »

Had an issue with Mac filtering before and I just realize that all devices that needs internet whether wifi or landline needed to be part of the "allowed" list in order to access...  Can the router be recoded to only do wireless mac filter instead?
Logged

HankRiker

  • Level 2 Member
  • **
  • Posts: 83
Re: Suggestion: Wireless Mac Address Filtering
« Reply #1 on: February 28, 2010, 07:04:24 AM »

Had an issue with Mac filtering before and I just realize that all devices that needs internet whether wifi or landline needed to be part of the "allowed" list in order to access...  Can the router be recoded to only do wireless mac filter instead?

I thought it did, but I just checked and I don't see a toggle, so apparently it does not.

I'm wondering: Are you thinking of using the MAC address filter for security? If so? Don't.

It's trivial to detect and spoof wireless MAC ID's.

I suggest using WPA2-PSK or at least WPA-PSK-AES for network security.

If you're not using it for security, then sorry about that.
Logged
My D-Link Hardware:
DIR-825 HW:B1 FW:2.02NA || DIR-825 HW:A1 FW:1.01 || DGS-1016D HW:C1 || DGL-4500 HW:A1 FW:1.02
DGL-4300 HW:A4 FW:1.9 || DGS-2205 || DGL-4300 HW:A2 FW:1.9 || DGL-4300 HW:A1 FW:1.9

koshia

  • Level 1 Member
  • *
  • Posts: 7
Re: Suggestion: Wireless Mac Address Filtering
« Reply #2 on: March 02, 2010, 08:33:41 PM »

Yes I was using it for security.  I thought this method was close to impossible to hack?  In any case, I would use WPA2, but some devices like my PDA / phone won't accept the WPA2 settings for some reason.
Logged

HankRiker

  • Level 2 Member
  • **
  • Posts: 83
Re: Suggestion: Wireless Mac Address Filtering
« Reply #3 on: March 03, 2010, 12:39:20 AM »

Yes I was using it for security.  I thought this method was close to impossible to hack?  In any case, I would use WPA2, but some devices like my PDA / phone won't accept the WPA2 settings for some reason.

No, sadly, MAC address filtering is trivial to hack, and not real security. A good percentage of WiFi devices on the market are MAC address programmable. As is the DGL-4500. It allows you to change the MAC address of device to match the MAC address of the PC if your ISP requires that, or you can just change it to eliminate conflicts in a network.

Some older devices aren't capable of supporting the higher demands made by WPA2. There is a less secure form of WPA, which uses TKIP instead of AES. I don't recommend using it, as theoretical attacks have already been shown to work against it to limited success, but it's certainly better than WEP. WEP is so broken that an attacker only needs a few minutes at most using the most aggressive hacking software to recover your WEP key/s and then it's game over.

Hope this helps,
Hank
Logged
My D-Link Hardware:
DIR-825 HW:B1 FW:2.02NA || DIR-825 HW:A1 FW:1.01 || DGS-1016D HW:C1 || DGL-4500 HW:A1 FW:1.02
DGL-4300 HW:A4 FW:1.9 || DGS-2205 || DGL-4300 HW:A2 FW:1.9 || DGL-4300 HW:A1 FW:1.9

philwoz98

  • Level 2 Member
  • **
  • Posts: 69
Re: Suggestion: Wireless Mac Address Filtering
« Reply #4 on: March 03, 2010, 10:29:06 AM »

Agreed^. I was able to hack my wep in about five minuates once I had backtrack and a wifi card that works. It was strictly testing purposes, ever sense then I won't go back wep.
Logged