• May 19, 2025, 04:40:10 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Cannot Access Router's Setup Interface  (Read 7377 times)

namonakiuta

  • Level 1 Member
  • *
  • Posts: 3
Cannot Access Router's Setup Interface
« on: March 05, 2010, 10:46:25 PM »
I was updating my firmware from 1.11 to 1.33NA and after it uploaded and installed...after the reboot, I wasn't able to connect to the interface via http://192.168.0.1/  It would always time out.

I powered down the modem, then the router, and then the PC and still no luck.  I also tried to reset from the button in the back and power cycled through...and still times out.

I'm running a Vista PC and is hardlined to the router.

Tell me that I don't own a hundred dollar brick.

Any and all suggestions welcomed...if you need more info..let me know
Logged

Sammydad1

  • Level 5 Member
  • *****
  • Posts: 722
Re: Cannot Access Router's Setup Interface
« Reply #1 on: March 06, 2010, 09:56:38 AM »
Hi,

I would do a hard reset on the router....  Is it possible the router's Ip got changed to something else besides the 0.1 IP ?

Have you tried 192.168.1.1 ?  Mostly a thought....
Logged
DIR-655 A2, FW: 1.35NA

namonakiuta

  • Level 1 Member
  • *
  • Posts: 3
Re: Cannot Access Router's Setup Interface
« Reply #2 on: March 06, 2010, 12:22:33 PM »
Hard reset as in the button in the back...i've tried that.  In terms of address...i've tried 192.168.1.1 and 192.168.2.1 and 192.168.3.1 with no luck.

this is the error i get.

The connection has timed out                     

The server at 192.168.2.1 is taking too long to respond. 


    *   The site could be temporarily unavailable or too busy. Try again in a few
          moments.

    *   If you are unable to load any pages, check your computer's network
          connection.

    *   If your computer or network is protected by a firewall or proxy, make sure
          that Firefox is permitted to access the Web.




       
       
     


     
     
Logged

alphanumeric

  • Level 3 Member
  • ***
  • Posts: 156
Re: Cannot Access Router's Setup Interface
« Reply #3 on: March 06, 2010, 12:44:14 PM »
Did you hold the reset button for at least 10 seconds with the router powered up? Open a command window and run ipconfig/all and see what you get for an ip address. The ip address listed as default gateway will be the ip address of the router, thats the one you use to log into it. If you see a bunch of 0.0.0.0's try ipconfig/release and then ipconfig/renew. If you still get zero's after that then your router may be bricked. If you want to conferm there is nothing wrong with your PC connect directly to your modem and see if you get a connection.
Logged

namonakiuta

  • Level 1 Member
  • *
  • Posts: 3
Re: Cannot Access Router's Setup Interface
« Reply #4 on: March 08, 2010, 04:05:01 PM »
it doesn't look like its working...lights are still flashing...but like the other poster...do i have a new brick to hammer?
Logged

alphanumeric

  • Level 3 Member
  • ***
  • Posts: 156
Re: Cannot Access Router's Setup Interface
« Reply #5 on: March 09, 2010, 03:10:56 AM »
What do you get for numbers when you run ipconfig/all ?
Logged