Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[digiital]

I don't know how this happen. When I bought the unit I know I set it up as RAID1(Mirrored). Just happen to be looking at how much free space I had left when I noticed that It's not a RAID1 setup.  Vol-1 is RAID1 and Vol-2 is JBOD is empty.


Is there anyway to put my system back to RAID1 without having to format both drives?.

The better question to ask is how did the system change from RAID1 to what I have now??

I have only done upgrades for the firmware, which I have now 1.08.





HARD DRIVE INFO :

Total Drive(s):    2
   
Volume Name:    Volume_1
Volume Type:    RAID 1

Volume Name:    Volume_2
Volume Type:    JBOD

PHYSICAL DISK INFO :
Slot    Vendor    Model    Serial Number    Size
Right    Seagate    ST31000333AS    9TE1XX    1000 G    
Left    Seagate    ST31000333AS    5TE0XX    1000 G    

[fordem]

Chances are that's exactly how you first set it up - if, when you create the RAID array, you don't utilize all of the available space, whatever's left is used in a JBOD volume.

No - there is no way to fix it without a reformat.