• February 24, 2025, 07:10:23 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: 100Mbps network performance  (Read 3608 times)

jamieson

  • Level 1 Member
  • *
  • Posts: 11
100Mbps network performance
« on: April 22, 2010, 09:47:02 AM »
Here's my setup:

10/100 router/switch
Laptop with 10/100 NIC
Desktop PC with 10/100 NIC
DNS-321, FW1.03, 2 x 500GB drives, RAID1, EXT3

All network connections are 100Mbps full duplex.

Transferring a single large (1GB) file between the laptop and the desktop takes about 2 minutes, or about 8MB/sec.  This is probably about as good as it gets with 100Mbps.

When transferring the same file between either machine and the DNS it drops to HALF that, about 4MB/sec.  It would appear that the DNS is the bottleneck in this system.  Others on this forum are reporting DNS transfers of > 10MB/sec -- granted they're using GBE -- but still I was hoping to approach the 8MB/sec performance that I'm getting with the PCs.  Any suggestions?

Logged

jamieson

  • Level 1 Member
  • *
  • Posts: 11
Re: 100Mbps network performance
« Reply #1 on: April 22, 2010, 10:31:40 AM »
I should mention that it shipped with firmware v1.02.  I installed 1 drive and formatted it as EXT3.  Then did the firmware upgrade to v1.03, then added the second drive and setup RAID1.  I did NOT do a load factory defaults after the FW upgrade, probably should have.  I'll try that tonight and reformat the drives and see if anything changes.
Logged