Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[drick]

Yes. We don't send out parts =P.

that is what i figured, will they cross ship me a new unit if i provide CC up front?

[drick]

here is another weird one.

one one of my units, i have 3 directories mapped to a Win7 X64 machine that is in a workgroup. i can not any of the directories via their mapped names. i also cannot mount the unit by ip address to the root folder

i can see directory 2 from other machines on my network

this changed after upgrading to 1.04 fw.

[dice1111]

1.04beta is working for me, thank you.

I believe this is a known issue, but browsing the Upnp directories, %20 is used instead of a space on all files and directories.

Dice

[dice1111]

that is what i figured, will they cross ship me a new unit if i provide CC up front?

Yes they will. I have done it twice now, trying to trouble shoot this fan issue.

Dice

[D-Link Multimedia]

1.04beta is working for me, thank you.

I believe this is a known issue, but browsing the Upnp directories, %20 is used instead of a space on all files and directories.

Dice

Yeah I am aware of this issue. We did do some minor upnp changes in this beta so it must have caused this.

[dice1111]

I have also posted this in the "Requires frequent manual refreshes" thread:

Also, with the 1.04beta.

Another issue I have noticed (i haven't played around with it however), is that some folders are not located in their proper directories when accessing via my Upnp device.

Folders that should be located in Volume1 - Media - Pictures are located in Volume1. These folders are located in the correct location when browsing via windows on the PC.

The device is a Samsung Blu-Ray Player: BD-C5500

I do have two other Upnp devices, an Asus O!Play HD, and two PS3's a old style and a new slim. i will try and recreate this on the other devices when I get a chance.

Dice

[drick]

here is another weird one.

one one of my units, i have 3 directories mapped to a Win7 X64 machine that is in a workgroup. i can not any of the directories via their mapped names. i also cannot mount the unit by ip address to the root folder

i can see directory 2 from other machines on my network

this changed after upgrading to 1.04 fw.

never mind, this is not a DLink problem, it's a NetGear problem. I also added another switch to my environment at the same time.

That's what i get for making multiple changes at once. 

[dice1111]

I have also posted this in the "Requires frequent manual refreshes" thread:

Also, with the 1.04beta.

Another issue I have noticed (i haven't played around with it however), is that some folders are not located in their proper directories when accessing via my Upnp device.

Folders that should be located in Volume1 - Media - Pictures are located in Volume1. These folders are located in the correct location when browsing via windows on the PC.

The device is a Samsung Blu-Ray Player: BD-C5500

I do have two other Upnp devices, an Asus O!Play HD, and two PS3's a old style and a new slim. i will try and recreate this on the other devices when I get a chance.

Dice

This is actually occurring on the other devices as well. When I go to the Pictures folder where these folders should be, they are not there.
I am doing a manual refresh of the Upnp and will see if this has an effect.

Dice

[rccoleman]

After getting the lockup/loud fan issue repeatedly on my relatively new unit, I got the new beta firmware.  I attempted to install it through the web interface and it appeared to go through the update process (progress bar went to the end), ending with the fan running at full blast.  After about 30 minutes, the web page hadn't refreshed and I couldn't ping the device, so I pulled the power.  Now it's stuck in a reboot loop that I can't get it out of, even if I hold down the reset button on the back.  Is there any way out of this?

The current sequence is "DLink", "System is booting..." (animated), "System Restart!", "DLink", etc.

My searches for a "dead device" restore are coming up empty.

Thanks,
Rob

[D-Link Multimedia]

After getting the lockup/loud fan issue repeatedly on my relatively new unit, I got the new beta firmware.  I attempted to install it through the web interface and it appeared to go through the update process (progress bar went to the end), ending with the fan running at full blast.  After about 30 minutes, the web page hadn't refreshed and I couldn't ping the device, so I pulled the power.  Now it's stuck in a reboot loop that I can't get it out of, even if I hold down the reset button on the back.  Is there any way out of this?

The current sequence is "DLink", "System is booting..." (animated), "System Restart!", "DLink", etc.

My searches for a "dead device" restore are coming up empty.

Thanks,
Rob

I have seen something similar before. Are you running a Raid 5 with 4 drives? Try popping out the last drive in the array before booting. You may need to wipe the partitions on that drive and put it back in the DNS-343 to let it rebuild correctly.

[rccoleman]

I have seen something similar before. Are you running a Raid 5 with 4 drives? Try popping out the last drive in the array before booting. You may need to wipe the partitions on that drive and put it back in the DNS-343 to let it rebuild correctly.

I'm actually running in JBOD mode (it's a backup of my other two NASs, which are running a RAID configuration). I tried popping out all of the disks and I get the same behavior, but I can try other combinations. If the DLink works like other brands, I'm afraid that I've hosed up something in on-board flash.

[rccoleman]

Well, I'm officially out of ideas.  No amount of playing around with the device is bringing it back to life, and I've contacted support.  Just in case, I'll ask again: Is there any sort of "emergency recovery" procedure?  Maybe via USB?

Thanks,
Rob

[dice1111]

This is actually occurring on the other devices as well. When I go to the Pictures folder where these folders should be, they are not there.
I am doing a manual refresh of the Upnp and will see if this has an effect.

Dice

Manual refresh worked.

Any word on a release date for an official firmware update of 1.04?

[irok760]

I sent an email with  my sn# and other info and have not received the new firmware.  Can someone send it to me?  Dlink has no support and cannot support me.

[D-Link Multimedia]

I sent an email with  my sn# and other info and have not received the new firmware.  Can someone send it to me?  Dlink has no support and cannot support me.

There is a link at the top of this forum in the firmware release sticky. Read it and download it.