Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JavaLawyer]

Not to nitpick, but for the sake of clarity there's a typo on the NS-343 beta beta download thread:

Click the link below to access the DNS-323 Beta firmware
ftp://ftp.dlink.com/Multimedia/dns343/Beta/

[JavaLawyer]

Not to nitpick, but for the sake of clarity there's a typo on the NS-343 beta beta download thread:

Click the link below to access the DNS-323 Beta firmware
ftp://ftp.dlink.com/Multimedia/dns343/Beta/

Looks like the page was updated today for the correct model number.
- Thanks

[BatMobile]

Finally got off my backside and loaded the new firmware...unfortunately, after about 30 seconds, the fans came on high speed and the system locked up.  Running Raid 5 with 4x1.5 TB disks...just rebooted and getting the 'System is booting' message.

About to pull the plug again and pull that 4th disk as mentioned earlier in the thread....SO MUCH FUN!!

Kind of sad that all this effort has to go into getting these setups nice and reliable.

[BatMobile]

OK...so...system rebooted with 3 out of 4 disks, still showing 1.03 as the firmware.  Should I repartition that 4th drive and reinstert...or try to do the firmware upgrade to 1.04a FIRST...then pop the 4th drive in??

I have my config backed up so reapplying all that once this drama is over should not be a problem.

Let me know if you can.  In the meantime, I run 'degraded' with 3 drives in.

[Smyle1]

The new firmware worked great after a manual refresh. Without the manual refresh, the folder structure changed to something erroneous and still showed the %20 as the space placeholder.

It should be part of the firmware upgrade to force a manual refresh so users.

Just my opinions 

[BatMobile]

OK...so...system rebooted with 3 out of 4 disks, still showing 1.03 as the firmware.  Should I repartition that 4th drive and reinstert...or try to do the firmware upgrade to 1.04a FIRST...then pop the 4th drive in??

I have my config backed up so reapplying all that once this drama is over should not be a problem.

Let me know if you can.  In the meantime, I run 'degraded' with 3 drives in.

Any assistance would be GREATLY appreciated....

[D-Link Multimedia]

Any assistance would be GREATLY appreciated....

Try reflashing the firmware again. Once it is successful you can try re-inserting the 4th drive. If it keeps locking up on bootup, wipe the partitions on that drive and re-insert it.

[Smyle1]

Ok, I spoke too soon...

Folders that contain spaces are still showing %20 on the PS3, however, this only appears after the folder is selected.

Sorry to say, there is still a problem with the firmware...

[D-Link Multimedia]

Ok, I spoke too soon...

Folders that contain spaces are still showing %20 on the PS3, however, this only appears after the folder is selected.

Sorry to say, there is still a problem with the firmware...

Try resetting to defaults and refreshing.

[BatMobile]

Try reflashing the firmware again. Once it is successful you can try re-inserting the 4th drive. If it keeps locking up on bootup, wipe the partitions on that drive and re-insert it.

OK...1.04beta is on with the 3 drives, gonna power down and reinstert drive 4 and bring it back up...wish me luck!!

[Smyle1]

Try resetting to defaults and refreshing.

I did as instructed, yet remain with the same error. %20

[BatMobile]

OK...1.04beta is on with the 3 drives, gonna power down and reinstert drive 4 and bring it back up...wish me luck!!

FYI...system is running in Raid 5 with 4 good disks again showing FW 1.04Beta...

So far no high speed fans or lock ups....will put her through her paces and see what happens.

Thanks!

[dice1111]

Is there an update to the 1.04Beta firmware recently? Is there a tentative release date? This is getting crazy that it is taking so long. It's been months with all these known and supposedly resolved issues.

Dice

[D-Link Multimedia]

Is there an update to the 1.04Beta firmware recently? Is there a tentative release date? This is getting crazy that it is taking so long. It's been months with all these known and supposedly resolved issues.

Dice

Yeah theres another update coming. Wont be posted today but probably early next week pending no major issues on my units after loading it.

[dice1111]

Yeah theres another update coming. Wont be posted today but probably early next week pending no major issues on my units after loading it.

Cool. Thank you for the quick reply!