• February 24, 2025, 09:50:54 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Two identical adapters, one connects at 54Mb, one at 1Mb!  (Read 3738 times)

david_uk

  • Level 1 Member
  • *
  • Posts: 15
Two identical adapters, one connects at 54Mb, one at 1Mb!
« on: June 11, 2010, 10:54:05 PM »

I'd be grateful for any help here. The cable modem and router had some problems earlier in the week, and I rebooted them and re-loaded the router configuration file. Wired connections are fine, as is my laptop and my daughters connection. My son's however runs at 1Mb according to the router and a speed check on his computer. I've tried removing the adapter from control panel and reloading the driver, but it still connects at that speed.

The router is set at g/n wpa2 personal with Tkip encription. The adapters are identical Belkin usb ones. We currently have wireless G adapters only. I'm going to upgrade the adapters to wireless N, as my son's new laptop hs that spec and then all wireless pc's can connect as N.

I don't THINK he's done anything weird to his computer that's causing this, as it all started when the router crashed and had to be rebooted. Is there anything on the router that might be causing this problem?
Logged

Skello

  • Level 3 Member
  • ***
  • Posts: 139
Re: Two identical adapters, one connects at 54Mb, one at 1Mb!
« Reply #1 on: June 12, 2010, 12:27:38 AM »

Are you running on the latest firmware version for your hardware revision?

What is your revision - otherwise known (and written on the box) as "H/W Ver." And what is your "S/W Ver." or firmware version? It should say in the upper right corner of the web interface.
Logged

david_uk

  • Level 1 Member
  • *
  • Posts: 15
Re: Two identical adapters, one connects at 54Mb, one at 1Mb!
« Reply #2 on: June 12, 2010, 02:31:37 PM »

Hi. Hardware is B2, and firmware is 2.25.
Logged

Skello

  • Level 3 Member
  • ***
  • Posts: 139
Re: Two identical adapters, one connects at 54Mb, one at 1Mb!
« Reply #3 on: June 13, 2010, 01:40:28 AM »

You could try the latest 2.27 firmware for B2 from here:  ftp://ftp.dlink.cz/dir/dir-615/driver_software/DIR-615_fw_revB_2-27B01_eu_en_20100115.zip
Logged