Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[je3ph]

i have to use a 10-100 switch to connect to dir-655 router.when connected directly to roughter via cable computers shuts off and wont start
the connection on the computer is intel onbaord gig lan with the latest drivers installed
i have tried many dif. settings in advanced set up on nic but with no luck
any info would help
thanx

[FurryNutz]

Can you try different NICs and cabling? How exactly is the connection shutting off? What windows or OS are you using? Do other Computers directly connected to the 655 do the same thing? Whats the speed settings on the 655 set for? Auto or Manual? Try setting them to different modes?

[je3ph]

im using win vista 64
the other computer capable of 1000mbs is just fine when connected at i gig
new cables
settings of roughter are set for auto
nic is set for auto config also
the computer shuts off
not a shut down    as if the power cord was pulled out of wall
thanx for the responce

[FurryNutz]

Sounds like something on the Vista PC thats causing the shut down. Look at the Event Viewer and System logs and see if you can find any entries for the time frame of the power down. I might try a different NIC as well. If your using Vista 64, hit F8 after the BIOS posts for the PC and select Disable Driver Enforcement before you install any drivers. Some drivers are not signed fully and or not supported well in Vista x64. Disabling the Driver Enforcement might help get some drivers to install correctly. If the one PC is working well connected to the 655 and your Vista PC isn't then I would start at the PC and go from there. Let us know what you find.

[Sammydad1]

Hi,

I agree about the NIC doing something to the power grid inside the pc.....

Try booting into Safe Mode with Networking, and see if the 1Gb setting crashes in Safe mode.....if not, then you have some type of driver conflict issue.

Crash to off situation are not common.  It shouldn't be too hard to troubleshoot if it is a repeatable crash....repeatable crashes in windows are rare themselves....

[je3ph]

found out the prob.!
the mb was a 5 yr old board
the protocals for gigabyte rates wasnt sent in stone as they are now,
when i tried to connect to my new router the old nic on the mb choked and shut off the puter for saftey
thanx u guys and gals for all ur responces
bought a pci gig nic and allswwell !

[FurryNutz]

Glad you found the fix. Enjoy