Topic: Help! "Dead 323" (Read 4442 times)

jgj10 · « **on:** July 18, 2008, 12:11:04 PM »

I have had my DNS for about a year (maybe a little less). I came back from Lunch and all of the lights are off on the front of the unit. The only thing running is the fan -- it appears the logic board is not booting?

The only issue leading up to this was the right LED was about 1/2 as bright as the left -- but still functioned. I'm on a UPS (I work for a UPS company so it better be) and no other external issues.

So I have two drives loaded with data not spinning in the box?

?

Any ideas??

My Config:
-Firmware 1.05
-2 500GB drives
-about 50% utilized

ECF · « **Reply #1 on:** July 18, 2008, 01:50:22 PM »

Contact technical support by phone for an RMA (replacment)

jgj10 · « **Reply #2 on:** July 18, 2008, 03:11:08 PM »

Yes just did that.

Here is the next question. Please give me a sanity check on installing the new box WITHOUT LOOSING what's currently on the drives.

- Power up unit without the drives?
- Confirm the new unit is at 1.05 (matches current box)
- Run web interface and set box to RAID 1
- Reinstall the drives in original slots and restart

Is this right? What should I do to try and ensure that I don't loose the data on the two mirrored drives?

Thanks in advance.

ECF · « **Reply #3 on:** July 18, 2008, 04:13:41 PM »

That is correct. No data will be effected by this process. Once the DNS-323 is started it should show up in the Easy search just as it did before.

D-Link Forums

News:

Author Topic: Help! "Dead 323" (Read 4442 times)

jgj10

Help! "Dead 323"

ECF

Re: Help! "Dead 323"

jgj10

Re: Help! "Dead 323"

ECF

Re: Help! "Dead 323"