• February 26, 2025, 07:07:42 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Does upgrade from 1.07 to 1.09 destroy your data?  (Read 4384 times)

rfl

  • Level 1 Member
  • *
  • Posts: 1
Does upgrade from 1.07 to 1.09 destroy your data?
« on: January 06, 2011, 12:54:04 AM »
I have 2 1TB drives, in standard (no-RAID) connfig.  I have no place to back-up the approx 1500GB of data.  Has anyone actually made this upgrade and kept their data?  Please, I don't need to be told about the importance of data backup, I just want to know if anyone has sucessfully done this.
Logged

Jobine

  • Level 1 Member
  • *
  • Posts: 14
Re: Does upgrade from 1.07 to 1.09 destroy your data?
« Reply #1 on: January 06, 2011, 03:18:56 AM »
No
Logged

Rodent

  • Level 3 Member
  • ***
  • Posts: 136
Re: Does upgrade from 1.07 to 1.09 destroy your data?
« Reply #2 on: January 06, 2011, 03:43:38 AM »
I have upgraded from v1.04 to v1.08 with no problems with 2 x 500 gig drives ext2, I have since replaced 1 x 500 gig drive with a 2TB drive ext3, so I now have 1 x 2TB ext3 and 1 x 500 gig drive ext2 running in standard mode.

There is still no substitute for a backup...

R.
Logged

lookingforinfo

  • Guest
Re: Does upgrade from 1.07 to 1.09 destroy your data?
« Reply #3 on: January 06, 2011, 06:05:38 AM »
Also, remember that it is strongly recommended that after the upgrade is installed you should use TOOLS and the Restore option under DEFAULTS: to restore the system to factory default settings.  Before you do this, you need to record all your current settings so they can be manually re-entered.  The options to "Save Configuration Settings" and "Restore Configuration Settings" do not work.  There seems to be no way to create a file that contains the current settings, so you need to manually record the information in a document or save screen copies of the configuration settings. Hope this helps.
Logged

fordem

  • Level 10 Member
  • *****
  • Posts: 2168
Re: Does upgrade from 1.07 to 1.09 destroy your data?
« Reply #4 on: January 06, 2011, 06:44:59 AM »
Quote from: Rodent on January 06, 2011, 03:43:38 AM
I have upgraded from v1.04 to v1.08 with no problems with 2 x 500 gig drives ext2, I have since replaced 1 x 500 gig drive with a 2TB drive ext3, so I now have 1 x 2TB ext3 and 1 x 500 gig drive ext2 running in standard mode.

There is still no substitute for a backup...

R.

uhhh - if I recall correctly, there was a change made somewhere around 1.05/1.06, that requires a reformat to function properly - as I recall it does not request a reformat, and will appear to work, but a format is recommended, you might want to check the firmware notes and be guided accordingly.
Logged
RAID1 is for disk redundancy - NOT data backup - don't confuse the two.

Rodent

  • Level 3 Member
  • ***
  • Posts: 136
Re: Does upgrade from 1.07 to 1.09 destroy your data?
« Reply #5 on: January 06, 2011, 05:32:16 PM »
Quote from: fordem on January 06, 2011, 06:44:59 AM
uhhh - if I recall correctly, there was a change made somewhere around 1.05/1.06, that requires a reformat to function properly - as I recall it does not request a reformat, and will appear to work, but a format is recommended, you might want to check the firmware notes and be guided accordingly.

As I mentioned I have formatted the 2TB drive ext3 since upgrading to v1.08 but not the 500GB ext2 drive, I have seen no problems at all and have been running like this for almost a year now, since my 500GB drive is full I will be getting another 2TB HDD (if I can stall buy one that does not have 4k block size) and formatting it ext3 as well so I will not bother with the 500GB drive.

Thanks for your concern fordem

R.
Logged