• May 13, 2025, 04:25:30 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Norton Ghost 15  (Read 3931 times)

cxmiller

  • Level 1 Member
  • *
  • Posts: 2
Norton Ghost 15
« on: January 08, 2011, 09:00:06 AM »
 >:(

I've been able to copy files to the WD drive attached to my DIR-655 router but Ghost gets an error eventhough is recognizes the drive is connected. If others have this problem as well please let me know, thanks.

Regards
Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: Norton Ghost 15
« Reply #1 on: January 08, 2011, 09:31:29 AM »
Hi cxmiller,

For Ghost, plug the WD Drive into the USB Port on the computer itself. Don't use the USB Port on the Router when backing up or Restoring.

If you want a Hard Drive to plug into the Router, you need to use a Storage Unit that attaches with a Ethernet Cable.

Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10

cxmiller

  • Level 1 Member
  • *
  • Posts: 2
Re: Norton Ghost 15
« Reply #2 on: January 08, 2011, 02:57:53 PM »
OK, so what good is the usb connection at this point, my printer is wireless.

Thanks for responding
Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: Norton Ghost 15
« Reply #3 on: January 08, 2011, 05:07:23 PM »
Quote from: cxmiller on January 08, 2011, 02:57:53 PM
OK, so what good is the usb connection at this point, my printer is wireless.

Thanks for responding

Hi cxmiller,

I don't use the USB Port.

It could be use for an extra USB Hard Drive, but not for Ghosting  or Imaging the Hard Drive. And certaining not for restoring a partition.

Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10

davevt31

  • Level 9 Member
  • ****
  • Posts: 1601
Re: Norton Ghost 15
« Reply #4 on: January 08, 2011, 05:42:50 PM »
True, if you have to do a restore from the SRD you will never see that drive.  The use of that port was originally intended for use in setting up WCN with a flash drive, it was never intended for use to support drives and printers.  After a long time requesting the option of using it as a straight USB port Shareport software showed up but has always been buggy.  I think the best use of the port is to power a laptop cooler that the router sits on to keep the temps down on the router.
Logged