• February 23, 2025, 03:26:14 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Configuration for PS3 and Xbox360  (Read 9284 times)

jace5869

  • Guest
Configuration for PS3 and Xbox360
« on: November 14, 2008, 10:46:58 AM »
I'm wondering which would be better for Xbox Live and PSN.

UPnP - Enabled or Disabled w/
DHCP Reservations for Xbox 360 and PS3 and
Gamerfuel Enabled

Also should I enable or disable Dynamic Fragmentation?

I get very disappointing download speeds from PSN when download a 6-7GB movie.
Takes like 8-12 hours to download and I have a 10Mbps Downlink and 1Mbps Uplink
Logged

marksyr

  • Level 1 Member
  • *
  • Posts: 7
Re: Configuration for PS3 and Xbox360
« Reply #1 on: November 15, 2008, 01:34:26 PM »
I had to DMZ my PS3 and turn UPnP off in order to get things to work right.
Logged

anon

  • Level 3 Member
  • ***
  • Posts: 263
Re: Configuration for PS3 and Xbox360
« Reply #2 on: November 15, 2008, 01:54:42 PM »
I have a PS2 and PS3 connected to a dap-1522 that connects to the dgl-4500 on 5GHz. No setup was needed with both when I had fw1.02. Since upgrading (down grade is more like it) to 1.12, 1.13, and 1.15 I cant say now that I'm happy with the performance I get.

Maybe 1.16~ will be it for the consoles.
Logged

arod

  • Guest
Re: Configuration for PS3 and Xbox360
« Reply #3 on: November 19, 2008, 04:13:37 PM »
9 times out of 10 if you disable SPI and select both Endpoint Independent for both UDP and TCP filtering (located in the ADVANCED > FIREWALL section) fixes this issues.
Logged

anon

  • Level 3 Member
  • ***
  • Posts: 263
Re: Configuration for PS3 and Xbox360
« Reply #4 on: November 19, 2008, 08:15:57 PM »
...something that was not needed with 1.02
Logged

tweberis

  • Level 1 Member
  • *
  • Posts: 24
Re: Configuration for PS3 and Xbox360
« Reply #5 on: November 21, 2008, 09:27:44 PM »
I just recently obtained my PS3 and haven't had any problems with it just using UPnP as my main tower is DMZ.  Currently still using 1.12 firmware (came boxed with 1.02) and haven't stepped up to anything higher due to the volume of posts I have been reading about the various firmwares. Anyone have any further data on a better configuration and the recommended firmware to use?
« Last Edit: November 21, 2008, 09:33:23 PM by tweberis »
Logged

jace5869

  • Guest
Re: Configuration for PS3 and Xbox360
« Reply #6 on: January 07, 2009, 10:48:02 AM »
Quote from: Ru-Fi-Oh on November 19, 2008, 04:13:37 PM
9 times out of 10 if you disable SPI and select both Endpoint Independent for both UDP and TCP filtering (located in the ADVANCED > FIREWALL section) fixes this issues.

How does this affect security?
Logged

HellsChicken

  • Level 1 Member
  • *
  • Posts: 1
Re: Configuration for PS3 and Xbox360
« Reply #7 on: January 25, 2009, 04:26:50 PM »
Quote from: jace5869 on January 07, 2009, 10:48:02 AM
How does this affect security?

I'm wondering this as well.  I'm considering doing this, but my router's log is absolutely filled with blocked packets, and i can't tell if i should be glad those packets were dropped or if i should want them to get through.
Logged

joe_ottawa

  • Level 2 Member
  • **
  • Posts: 33
Re: Configuration for PS3 and Xbox360
« Reply #8 on: January 27, 2009, 08:57:46 AM »
UPnP - Enabled for all these devices (Router, PS3, DNS-323, IP internet radio, Popcorn Hour A110, HP MSS, IP Camera)
DHCP Reservations granted for PS3 and all other network devices (wired of wireless)
Gamerfuel Enabled
DMZ not for the PS3 (given for Slingbox instead, however i don't see much difference)

all devices mentioned here runs on respective latest firmwares and updates.
Logged