• February 24, 2025, 01:30:21 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Keep getting degraded status  (Read 7402 times)

tim1

  • Level 1 Member
  • *
  • Posts: 7
Keep getting degraded status
« on: December 01, 2008, 07:23:13 PM »
I keep getting a degraded status on my raid1 sync time. I have backed up all data and reformatted the drives. I copy the data back and have a completed sync status for a short time. Within a day it's back to degraded. I have two 300 gig hdd's in a raid1 config and am using firmware 1.05. Does anyone have any ideas why I keep going back to a degraded status?

Thanks  ???
Logged

Tank_Killer

  • Level 2 Member
  • **
  • Posts: 91
Re: Keep getting degraded status
« Reply #1 on: December 01, 2008, 07:50:56 PM »
are both your hard drives same model/brand? Are the both roughly the same age? Have they had very High usage?
Logged

tim1

  • Level 1 Member
  • *
  • Posts: 7
Re: Keep getting degraded status
« Reply #2 on: December 01, 2008, 08:13:48 PM »
Yes both drives are the same and were purchased at the same time. They do get quite a bit of usage, I have my itunes library and my movies on them.
Logged

D-Link Multimedia

  • Poweruser
  • Level 7 Member
  • **
  • Posts: 1066
    • D-link Systems, Inc.
Re: Keep getting degraded status
« Reply #3 on: December 02, 2008, 03:40:04 PM »
The only reason a degraded status would come up is if either a hard drive failed or it is causing a critical issue and the device is detecting it. What type of hard drive do you have?
Logged

tim1

  • Level 1 Member
  • *
  • Posts: 7
Re: Keep getting degraded status
« Reply #4 on: December 02, 2008, 08:18:19 PM »
I have "2" 320 gig seagate barracudas. Is there some kind of log report that is generated if the device is detecting some problem?
Logged

tim1

  • Level 1 Member
  • *
  • Posts: 7
Re: Keep getting degraded status
« Reply #5 on: December 08, 2008, 09:45:20 AM »
Is there a way to diagnose what the problem might be?
Logged

mpc190

  • Level 1 Member
  • *
  • Posts: 3
Re: Keep getting degraded status
« Reply #6 on: December 08, 2008, 10:01:02 AM »
I have the Same problem with two WD drives purchased at the same time (750gb).  I reformatted and set RAID 1, restored files, and ran into degraded status. I ended up formatting "bad" drive, restored RAID 1 and switched drive lcation (left to right & right to left). I'm monitoring status now, and hope "solution" works. 
Logged

tim1

  • Level 1 Member
  • *
  • Posts: 7
Re: Keep getting degraded status
« Reply #7 on: December 08, 2008, 12:40:19 PM »
Let me know how you make out. If it works I might have to try that to.
Logged

Rassilon

  • Level 1 Member
  • *
  • Posts: 3
Re: Keep getting degraded status
« Reply #8 on: December 08, 2008, 01:21:29 PM »
I have the same problem with mine (firmware v1.05).  I'm running two 500gb WD drives in Raid1.  From what I've found, if i shut the DNS323 down (even if i do it via the admin panel) I run the chance of the raid going into a degraded mode.  I don't think the drives are bad (I've popped both into my PC and run WD datalifeguard tools on them).  What's most concerning about this is the fact that the DNS doesn't report it as degraded as all (indicator lights are normal, no emails).  The only way I can see it is if i login and check the status.

This problem started for me on v1.05.
« Last Edit: December 08, 2008, 01:30:21 PM by Rassilon »
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: Keep getting degraded status
« Reply #9 on: December 29, 2008, 11:31:49 AM »
Please try the manual rebuild option in firmware 1.06.
Logged
Never forget that only dead fish swim with the stream