Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ActiefC]

Dear,

Can somebody help me out, please

I'm trying to make a vpn connection from a home computer to an office computer
I have a DI-804HV vpn broadband router

This is behind a DSL router
I can make a connection to the vpn router, but I do not have access to the office computer
I cannot ping the office computer as well

The VPN router is setup with PPTP connection
on my dsl router I forwarded ports: 50, 51, 500, 1723 to VPN Router

What am I doing wrong?

My setup:
home computer:
 ip: 192.168.1.3
 Router:
 ip: 192.168.1.1
 VPN IP: 10.0.0.2

Office computer:
 ip: 192.168.0.108
 vpn router lan: 192.168.0.1
 vpn router wan: 192.168.123.233
 vpn IP: 10.0.0.1
 router lan: 192.168.123.1
 router wan: provided from my ISP

[in-no-way]

Hi,
I have similar problem. I am not very experienced with VPN configuration and I don't know how to configure DI-804 HV VPN and DSL router.
I am trying to setup VPN serwer connection at office (on new site) where I have DI-804 HV VPN broadband router connected on its WAN port to DSL router.

I used this DI-804 HV VPN earlier on oldest site in other network where DI-804 HV VPN was behind Gateway and Gateway was behind DSL modem. VPN connection from this site to my home was established.

Now, I transfered this DI-804 HV VPN to new site with new network.
On new site with actual network I have tried to change only WAN and LAN settings on my DI-804 HV VPN and save the rest of VPN-Server configuration.

I have a problem with VPN connection establishing to my home with error 807.
I tried to setup this configuration practically without any manual, so it is not good and doesn't work.

I am looking for any proper manual how to setup VPN connection on DI-804 HV VPN behind DSL router with IP from internet provider.
Does onyone know any link to it?

[FurryNutz]

What ISP Modem make and model do you have?
If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems.
To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged.
If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ.