Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[MichaelL]

A1/2 are the same
A3 has realtek switch instead of Vitesse.
A/4 has same reaktek switch and a newer wifi radio.

Lycan,
Does the new wifi radio in A/4 address the frequent wireless restart problems seen by some?  I found that when I changed the Transmit Power from High to Medium, the restarts went away.  My guess is that the receiver is either susceptible to reflections (which would have a higher amplitude on the High setting) or that there is an elevated internal noise level with the transmitter at full power.  If A/4 addresses this, should I pursue RMAing my A3 hardware?

Thanks,
Mike

[Sebastian]

Guys,

1. Re-flash (to final) firmware 1.21
2. Set WAN connection to manual - 100 mbit
3. When unchecking DNS relay, manually enter DNS servers manually (other screen), this might take a reboot to take affect.

Let's see what happens

Thanks, but I did that already. results are nok.

just want to clarify one thing:
on my NAS I have an option to send me a mail in case of Critical errors
every time I had a reboot/reset, I have seem a mail in my mail box.
same time with the reset/reboot the streaming was interrupted on my pc (mapping the nas hdd as nfs) and the ps3 getting disconnected from media server.

since my last upgrade to 1.22 (yesterday) I see no more interruptions on pc but ps3 disconnection is still there

something changed - can someone else confirm that too?

to D-Link:
- can D-Link give more info on a sw roadmap and buglist to be resolved?
- with the list of bugs is only normal to see also a timeline for bugs resolution.

still have a week before returning the router - hope will see some more progress or information I can use

PS: I repeat my prev question - is there a need for remote connection to my router?
maybe D-Link labs have not A4 for test at the moment?!

Regards

[EddieZ]

Try changing some settings on the PS3. That's how others got rid of the errors.