Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Straka76]

I have a problem open port 3074 ,80, 88, 53 on my dir 655. I have setup all in the router, but when i test it then i get that: port is not open, I have some lag when i play NHL11 Xbox360 So i hope someone can help me get the ports open ?

[FurryNutz]

What HW version is your router?
What FW version is currently loaded?

What ISP Service do you have? Cable or DSL?
What ISP Modem do you have? Stand Alone or built in router?
What ISP Modem make and model do you have?

Ensure DNS IP addresses are being filled in under Setup/Internet/Manual?
Turn off QoS options.
Turn off Advanced DNS Services if you have this option.
Turn on DNS Relay under Setup/Networking.
Setup DHCP reserved IP addresses for all devices on the router.
Ensure devices are set to auto obtain an IP address.
Set Firewall settings to Endpoint Independent for TCP and UDP.


Check out the DGL-4500 forum for XBL game setup. Has DIR router setup as well.
http://forums.dlink.com/index.php?board=144.0

Let us know how it goes and if you need more help.

[Straka76]

What HW version is your router? A4
What FW version is currently loaded? 1.33NA

What ISP Service do you have? Cable or DSL? Cable
What ISP Modem do you have? Stand Alone or built in router? ZyXel Prestige 2602DIA
What ISP Modem make and model do you have?

Ensure DNS IP addresses are being filled in under Setup/Internet/Manual? I use LAN so it find a DNS only the primay
Turn off QoS options. You mean the http://192.168.0.1/Advanced/Traffic_Shaping.shtml ?
Turn off Advanced DNS Services if you have this option. ( dont think i have this options? )
Turn on DNS Relay under Setup/Networking. ( its ON )
Setup DHCP reserved IP addresses for all devices on the router. ( its ON )
Ensure devices are set to auto obtain an IP address. ( its ON )
Set Firewall settings to Endpoint Independent for TCP and UDP. ( its ON )

I have QoS Engine setup like this :
Dynamic Fragmentation OFF and rest ON
then i use QoS Engine Rules .. maybe not not correct or?

FIREWALL : Anti-Spoof checking OFF... correct?
ADVANCE  NETWOrK : Multicast Streams ON.. Correct ?

[FurryNutz]

What HW version is your router? A4
What FW version is currently loaded? 1.33NA

What ISP Service do you have? Cable or DSL? Cable
What ISP Modem do you have? Stand Alone or built in router? ZyXel Prestige 2602DIA
What ISP Modem make and model do you have?

Ensure DNS IP addresses are being filled in under Setup/Internet/Manual? I use LAN so it find a DNS only the primay. Use the Primary and any 2ndary DNS IP addresses under Status/Device Info/WAN Section.
Turn off QoS options. You mean the http://192.168.0.1/Advanced/Traffic_Shaping.shtml ? See below.
Turn off Advanced DNS Services if you have this option. ( dont think i have this options? ) This will be under Setup/Internet/Manual.
Turn on DNS Relay under Setup/Networking. ( its ON )
Setup DHCP reserved IP addresses for all devices on the router. ( its ON )
Ensure devices are set to auto obtain an IP address. ( its ON )
Set Firewall settings to Endpoint Independent for TCP and UDP. ( its ON )

I have QoS Engine setup like this :
Dynamic Fragmentation OFF and rest ON
then i use QoS Engine Rules .. maybe not not correct or?
I would review the DGL-4500 XBL sticky. This will help you configure QoS correctly.
FIREWALL : Anti-Spoof checking OFF... correct? Can be on or off.
ADVANCE  NETWOrK : Multicast Streams ON.. Correct ? Yes

How many xbox consoles do you have? One or more?

[Straka76]

only one :-)

[FurryNutz]

Ok...let us know how the sticky works for you. Can help out using teamviewer.com too help you set the router if you need.

[Straka76]

I have setup all now from what i see in sticky, but i can still NOT open the ports .. i use this http://www.yougetsignal.com And i have also used http://portforward.com ...

[FurryNutz]

You are using QoS settings and not Port Forwarding correct? You only need to use QoS rules for XBL.

[Straka76]

Ok so i dont need to setup Port Forwarding Rules ? I have right now setup Port Forwarding Rules + QoS Engine ? So let me know if that is wrong..?

[FurryNutz]

NO you don't need Port Forwarding. Delete those options. You only need QoS.

[Straka76]

Ok. so its only port 3074 and 53 i need on QoS Engine?
Local Port Range 3074 to 3074
Remote Port Range 3074 to 3074

And same with 53?

Local IP Range IP XXX to XXX same ip right?

[FurryNutz]

Correct..Use the remote IPs listed for the Gamefuel options. 65.52.0.0 to 65.55.255.255. Those are MS servers only. Let me know if they won't enter into the 655 router.

[Straka76]

I have now add 65.52.0.0 to 65.55.255.255 on both 3074 + 53.
more i need to do?

About WAN Traffic Shaping

Automatic Uplink Speed : I have this enable does that make a diff?
Connection Type : i have that set to auto, does that make a diff?

[FurryNutz]

Whats your UP load package speed? I usually manually set UP speed to about 1024K above what you actually have, give some overhead to play with. So if you have 1024 Up, I set for 2048 and so on.

Enable Traffic Shaping ON.
Connection Type: Manually set for DSL or Cable, which ever you have.
Enable QoS Engine ON
Automatic Classification ON
Dynamic Fragmentation OFF

[Straka76]

i have 2 UP. So then i need to set it to 2048? but i have only like 1851kbps "overhead"