Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[lingnau]

Hello.

I'm an old user of a DFL-800 but I've never worked with VLANs.

I'm planning to to the following:

My DMZ interface is connected to a DES-3526 manageable switch.
The DMZ interface is connected to the port 11.
I want port 11, 14 and 13 to form a VLAN. (VLAN 10).
All other ports should continue communicating normally.

What I've done:

Created a VLAN on the DFL-800 with a new IP/Range.
Tried creating a VLAN on the switch.

What I've acomplished:
Port 13 and 14 are "talking" to eachother, port 11 continues to work on it's normal IP but does not seem to respond in the VLAN.

I'll add a few images to make understanding a bit easier.

VLAN Config on DFL:


Enabled rules:


Routing table:


VLAN1 (Default) on switch:


VLAN10 on switch:


Any ideas?

[danilovav]

You need to tag only port 11 (connected to DFL) under VLAN 10
All other ports, change membership, but dont need to change tagging (should be off)

[lingnau]

I've setup an test enviroment (DFL-210 + 2x DES-3526) and VLAN is working as expected. Thanks for the reply danilovav, I will try it out again in the production environment and will feedback if it works.