Topic: Bone-Head Stunt -- Dropped-on-floor 655 requires some TLC (Read 4546 times)

fastartcee · « **on:** January 24, 2012, 03:33:11 PM »

I dropped my 655 router onto a concrete floor.

I plugged it in, and everything seemed fine. I plugged in the cable LAN, and connected to my laptop through a LAN port. The GUI came up as usual. I proceeded to set up the Net connection, and all went well ...I surfed with no problem.

But... my laptop cannot see any wireless signal.

I know there are no moving parts inside, but is it possible that something got jarred loose ...like a wire to the antennas? Has anyone opened up the box to fix such a problem?

Thanks for any help. I don't really want to have to buy a new one!

FurryNutz · « **Reply #1 on:** January 25, 2012, 07:42:32 AM »

No moving parts.
Try a factory reset, if that fails, RMA the unit.

fastartcee · « **Reply #2 on:** January 25, 2012, 09:17:33 AM »

Thanks for the reply.

I opened the case, but could see nothing wrong; there appeared to be no damage whatsoever. Even on the outer case the only damage I could find was a little ding on one corner.

I successfully flashed to the latest firmware, but when I look at the boot-up info in the status log I see "Wireless failed to initiate"... so I guess some component was, in fact, damaged.

So I guess my DIR-655 has been bricked. Oh well...

(If there is anything I could try, I'd appreciate any suggestions.)

FurryNutz · « **Reply #3 on:** January 25, 2012, 09:27:44 AM »

RMA the unit.
http://forums.dlink.com/index.php?topic=41867.0

fastartcee · « **Reply #4 on:** January 27, 2012, 11:36:05 AM »

Before I tossed my DIR-655 into the recycle bin, I decided to look inside once again, and after I opened the case I noticed something I hadn't noticed before: the circuit board holding the Atheros processor was slightly out of place, enough, I thought to compromise the connection at one side of the board. I wiggled it out, and then re-seated it ...and when I powered up the unit again the wireless LED was flashing!

I have put the 655 back into my system, and everything is back to normal. Yahoo!

I think it's incredible that it took an almost-8-ft drop onto a concrete floor, and other than jarring a circuit board out of its socket a bit, no damage was done. Thanks for making such a rugged product, D-Link!!

FurryNutz · « **Reply #5 on:** January 27, 2012, 11:44:42 AM »

Way cool man. Glad you took the time and found the fix.
Be careful next time.

Enjoy.

D-Link Forums

News:

Author Topic: Bone-Head Stunt -- Dropped-on-floor 655 requires some TLC (Read 4546 times)

fastartcee

Bone-Head Stunt -- Dropped-on-floor 655 requires some TLC

FurryNutz

Re: Bone-Head Stunt -- Dropped-on-floor 655 requires some TLC

fastartcee

Re: Bone-Head Stunt -- Dropped-on-floor 655 requires some TLC

FurryNutz

Re: Bone-Head Stunt -- Dropped-on-floor 655 requires some TLC

fastartcee

Re: Bone-Head Stunt -- Dropped-on-floor 655 -- WOW! Resurrected!

FurryNutz

Re: Bone-Head Stunt -- Dropped-on-floor 655 requires some TLC (RESOLVED)