Topic: format failure western digital WD1001fals, (Read 4627 times)

nigaan · « **on:** March 14, 2009, 01:06:36 PM »

I have tried firmware 1.4, 1.5, 1.6 with IE7 and firefox browser. i have 2 WD1001fals this is why i have tested standard, jbod,raid1, raid0.

the problem is during the formatting the completion process run as 1%,2%,3%... until 7% after that jump at 94%,95%.... and 100% after that it says formatting failure.

Those 2 drives are working fine under windows or linux.

Why i have bought that ...

D-Link Multimedia · « **Reply #1 on:** March 14, 2009, 01:19:27 PM »

Do not format the drives under windows or linux. Remove all partitions and re-insert into the DNS-323.

nigaan · « **Reply #2 on:** March 14, 2009, 01:26:53 PM »

Have you read my post? i had no choice to format my hdd after testing all you firmware nothing was working.

Now i know it's not hd issue.

I have lost 8 hours on that and i have read everything on the forums.

Zardoz66 · « **Reply #3 on:** March 14, 2009, 07:54:30 PM »

do like he advises, blow the format and partition. then install.

D-Link Forums

News:

Author Topic: format failure western digital WD1001fals, (Read 4627 times)

nigaan

format failure western digital WD1001fals,

D-Link Multimedia

Re: format failure western digital WD1001fals,

nigaan

Re: format failure western digital WD1001fals,

Zardoz66

Re: format failure western digital WD1001fals,