• February 24, 2025, 10:36:47 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Can't establish 1G network  (Read 4882 times)

cripp7

  • Level 1 Member
  • *
  • Posts: 9
Can't establish 1G network
« on: March 21, 2012, 09:44:29 AM »
I'm having a problem with my 320 connecting at 1G, it'll only do 100Mps.  I have it connected to a Dynex 10/100/1000 switch, also my pc won't connect at 1G either.  It's a new switch, so could it be a bad switch?
I have a Linksys 54G wireless router connected to my Cable modem, and one cable going to the switch.  Would a slower nic slow down the switch speed to all computers?

Currently I have a 2T WD HDD in the unit which works great, I also have a 500G drive that came out of a Buffalo EZ which crashed.  But the drive is still good.  It's formatted in the same ext2/ext3 format as the 1T drive, but when I add it the 320 shows Volume_2 but the drive shows a linux installation.  I hook it up to an Abuntu box and all my backup files/directories are there.  Why isn't it showing up the directories?
« Last Edit: March 21, 2012, 10:08:02 AM by cripp7 »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Can't establish 1G network
« Reply #1 on: March 21, 2012, 10:03:22 AM »
I would definitely check out a different switch.
Check cables, swap out to be sure. Cat6 is recommended.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

cripp7

  • Level 1 Member
  • *
  • Posts: 9
Re: Can't establish 1G network
« Reply #2 on: March 21, 2012, 10:08:55 AM »
I tried that option, not a cat6 cable though
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Can't establish 1G network
« Reply #3 on: March 21, 2012, 10:25:17 AM »
In the Web UI (Management > LAN Setup > Link Speed), did you check whether the Link Speed is set to either "Auto" or "1000"?
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Can't establish 1G network
« Reply #4 on: March 21, 2012, 10:25:38 AM »
Ensure devices and PC's NICs support Gb connections and drivers are updated for NICs and sometimes NIC Properties need to be set up for Gb speeds. Refer to Mfr information for those NICs.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

shabuboy

  • Level 2 Member
  • **
  • Posts: 78
Re: Can't establish 1G network
« Reply #5 on: March 22, 2012, 09:59:18 AM »
I would check the cable, make sure you have at least Cat5e, otherwise, you will never get 1gb speed.
cat5: 10/100
cat5e:10/100/1000

http://www.networkcablingdirectory.com/articles/structured-network-cabling-id_1151.htm
« Last Edit: March 22, 2012, 10:04:14 AM by shabuboy »
Logged