Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[hongaun]

Just wondering, After I updated my fw to 2.03b3, am i able to revert back to 2.02?

I'm currently at 2.02, there's really no way for me to go back to 2.00 uh...

The 0kB issue, i plan to use the hdd in my nas as jbod, am i running into this risk as well when it comes to copying large files?

I have a few 6-7GB of .Iso and mpg files in the nas, so far no 0kb as reported yet. Everything are copied using Windows Explorer copy and paste on Win 7 x64.

[JavaLawyer]

Just wondering, After I updated my fw to 2.03b3, am i able to revert back to 2.02?

Firmware v2.03b03 is not supported by D-Link and was developed specifically for DNS-320s in a non-US country/region. DNS-320 owners who obtain and install a leaked copy of this firmware do so at their own risk.

[hongaun]

Firmware v2.03b03 is not supported by D-Link and was developed specifically for DNS-320s in a non-US country/region. DNS-320 owners who obtain and install a leaked copy of this firmware do so at their own risk.

I am from Malaysia btw, so I guess it has a chance of being able to work. Anyway I have yet to install it, still using 2.02 here.

Anyway I tried to copy a 7GB file into the dns320 using both Teracopy and a normal windows copy and paste. A file copy using TeraCopy resulted in a CRC error, while using a normal windows copy and paste has no CRC error at all.

Hope this findings will be helpful .

[JavaLawyer]

Regarding Firmware version 2.03b03: DNS-320 - Firmware Version 2.03b03 - Notice

[hongaun]

Great on the notice.

Anyway I tested with another 1GB file, again, Teracopy-copy resulted in a checksum error, and a normal windows copy and paste checksum checks out.

I tried verifiying with md5 as well..same thing happened. The file I used teracopy to copy was corrupted while the normal copy was fine.

[xbrav]

Hey Java, in regards to that notice, is there any reason we cannot be given a rough roadmap to the release of 2.03 stable?

Also, I noticed that there are no links to the stable firmwares on the forums.

2.00:ftp://ftp.dlink.com/Multimedia/dns320/Firmware/dns320_FW_200
2.02: ftp://ftp.dlink.com/Multimedia/dns320/Firmware/dns320_FW_202

[JavaLawyer]

Hey Java, in regards to that notice, is there any reason we cannot be given a rough roadmap to the release of 2.03 stable?

If I had that information available, I would have shared it with the community. Unfortunately, D-Link is rather secretaive when it comes to FW release dates and overall roadmap.

Also, I noticed that there are no links to the stable firmwares on the forums.

2.00:ftp://ftp.dlink.com/Multimedia/dns320/Firmware/dns320_FW_200
2.02: ftp://ftp.dlink.com/Multimedia/dns320/Firmware/dns320_FW_202

Thanks. . . I updated the firmware sticky with the official release path: DNS-320 - Firmware, Manuals, Emulators, and Support Material

[hongaun]

If I had that information available, I would have shared it with the community. Unfortunately, D-Link is rather secretaive when it comes to FW release dates and overall roadmap.


Thanks. . . I updated the firmware sticky with the official release path: DNS-320 - Firmware, Manuals, Emulators, and Support Material

If you're able to pass this to the D-Link team, I think most of us would appreciate it even if the release dates provided are tentative and not confirmed. Does D-Link have a regular firmware release cycle of some sort?

[JavaLawyer]

If you're able to pass this to the D-Link team, I think most of us would appreciate it even if the release dates provided are tentative and not confirmed. Does D-Link have a regular firmware release cycle of some sort?

From experience, I can say that D-Link does not publicly discuss their firmware release cycle, neither confirmed nor conceptual.

[smurff33]

Just a quick heads up for people looking to upgrade to the following firmware:-

Firmware Version 2.03b03

I did and can say it has worked a treat so far, i am in the UK...

[homo]

Can you send to me a link with pm please for downloading this firmware?
I cannot find it

[joseg.villamizar]

Watching the DNS-320 NAS,

when purchased new NAS and connected to gigabit router and gigabit pc this copy from the NAS to the PC to 35 MB / s, if you enable the P2P low speed to 11 MB / s, if you enable the DLNA streaming P2P is built next to the speed drops to 6 MB / s

if you disable the P2P and streaming DLNA and Twonky server installed fun_plug with SSH enabled and the speed remains at 10 MB / s.


my question is there any application to stabilize the CPU to maintain the initial velocity or is inevitable with this pileup?

because I have a Western Digital NAS mybookworld white light activated yet speed is 20 MB / s fixed and wifi keeps surprising 10MB / s

[joseg.villamizar]

Was reading through forums and fell on this....responding to a thread about corrupted data in the latest 2.03b01. Has anyone tested this so called version 2.03b03?? Apparantly it solves all data corruption issues...

I have installed the firmware 2.03.b01 works perfectly and does not corrupt the data on P2P works well, the only thing I see but I could try before the speed is low Transference, as active and dlna p2p, or simply when fung_plug install and run TwonkyServer

[Bulles30]

Hi,

Just for information :

My DNS worked perfectly until now under 2.03b01. But:
- it becomes impossible to copy large files from any source (~700 kb e.g.). The CRC is always bad with TeraCopy, It was good before this week.
- the Copy button on the front face of the DNS doesn't work. Il I plug a USB Key, it's mounted and shared correctly on my network by the DNS, but impossible to realize a direct copy with the copy button (in order to avoid copy by the network)...

My config is 2 disks o f1 Tb mirrored (RAID 1).

The content loaded before (any size) remains stable and readable.

[hongaun]

Hi,

Just for information :

My DNS worked perfectly until now under 2.03b01. But:
- it becomes impossible to copy large files from any source (~700 kb e.g.). The CRC is always bad with TeraCopy, It was good before this week.
- the Copy button on the front face of the DNS doesn't work. Il I plug a USB Key, it's mounted and shared correctly on my network by the DNS, but impossible to realize a direct copy with the copy button (in order to avoid copy by the network)...

My config is 2 disks o f1 Tb mirrored (RAID 1).

The content loaded before (any size) remains stable and readable.

this problem is already know with 2.03b01, even present in 2.02. Most of us solved by using the inofficial release of 2.03b3, or those lucky enough to have receive the fw version 2.00 remained at that version.

If you are on 2.03b1, I suggest you to refrain from using Teracopy. The file corruption seem to occur less when using the normal copy and paste / normal file transfer.

I was using 2.02 prior, was able to consistenly corrupt my files while using Teracopy, whereas yet to encounter a file corruption issue using normal transfer.