• November 06, 2025, 09:15:53 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR-655 label says Hardware Ver A3, while Admin says A4, which is correct?  (Read 6649 times)

psale

  • Level 1 Member
  • *
  • Posts: 2
DIR-655 label says Hardware Ver A3, while Admin says A4, which is correct?
« on: March 22, 2009, 10:46:56 AM »
The printed label on the bottom of my Dir-655 says the hardware version is A3, firmware ver is 1.21. When I logon to the ADMIN panel it displays the Hardware Version:A4 and Firmware Version: 1.21. Which is correct?

I wanted hardware version A4 to enjoy cooling running device with a slightly better (longer range) radio. What did I "really get?"
-
Peter Sale
Logged

EddieZ

  • Level 10 Member
  • *****
  • Posts: 2494
Re: DIR-655 label says Hardware Ver A3, while Admin says A4, which is correct?
« Reply #1 on: March 22, 2009, 11:04:33 AM »
A bit of both probably  ;D

PM the serial to one of the board mods and let them check.
Logged
DIR-655 H/W: A2 FW: 1.33

psale

  • Level 1 Member
  • *
  • Posts: 2
Re: DIR-655 label says Hardware Ver A3, while Admin says A4, which is correct?
« Reply #2 on: March 22, 2009, 11:57:18 AM »
Quote from: EddieZ on March 22, 2009, 11:04:33 AM
A bit of both probably  ;D

PM the serial to one of the board mods and let them check.

Not familiar with what you mean by "PM", Post Message maybe? In any case, the label reads as follows:
P/N: BIR655ANA....A3
S/N:F35F38C002602
H/W Ver:A3  F/W Ver:1.21

I can still RMA this item back to Newegg, so I'm not going to "crack the case" and invalidate the warranty to get a number from any of the PC boards within the case.
-
Peter Sale
« Last Edit: March 22, 2009, 02:38:11 PM by psale »
Logged

Reinvented

  • Level 4 Member
  • ****
  • Posts: 437
Re: DIR-655 label says Hardware Ver A3, while Admin says A4, which is correct?
« Reply #3 on: March 22, 2009, 02:08:25 PM »
Ugh...Learn to read please.  He's saying to PRIVATE MESSAGE THE MODERATORS.  They are the D-Link technicians and can further assist you with your serial/hardware version problem. 

Edit your information please...remove your MAC address, and WPS Pin.
Logged