• November 02, 2024, 10:33:45 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: My DIR 655 is not acting like a router but more like a switch  (Read 3011 times)

vaxner

  • Level 1 Member
  • *
  • Posts: 1

Hello everyone!
I have been forced to register on here and ask for help as nothing I do/in the forums seems to solve the following problem:

My DIR 655 is refusing to act like a router and more like a normal switch. Anything involving the router side of things (DHCP,firewall,wireless, etc) does not work.

Basically when it powers up the blue power light comes on and that's it. If I plug my cable modem into the wan port then this light comes on with nothing else. If I then proceed to plug a cable into Lan 1 I get the address of my cable modem assigned to my computer and all internet access is fine. As opposed to being assigned an address from the router's DHCP. If I plug a cable from another router into any of the lan ports on the DIR 655 then I get assigned addresses from that router's DHCP and all internet access is routed through.

I have tried all of the following and nothing changes:
Connecting to the DIR 655 admin on 192.168.0.1 - connection times out.
Doing both a reset (pressing button on back) and/or hard reset (30-30-30) - nothing changes.
Getting to the emergency firmware page - blue light never changes to amber and the connection to 192.168.0.1 times out.

I could really use some help as I have officially run out of ideas and would rather not have an expensive looking switch.

My Dir 655 is a V4 with the 1.31EU firmware.



Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: My DIR 655 is not acting like a router but more like a switch
« Reply #1 on: May 27, 2012, 09:57:51 AM »

Seems that you done everything to get the router to come to ready or respond. I would try using a different pc and test. Its possible your unit has died. I would contact your local regional DLink support office and see if you can RMA this unit.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.