Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[lucien62]

Hi !

I have a D-Link DSL-2730U loaded with TH_1.02 firmware.
I'm trying to wake up my home server with a magic packet from the WAN but all my attempts have failed so far. It does work when I do it from the LAN though.
My ip subnet is 192.168.3.0/24

This is what I did:

- Forward UPD port 9 to the broadcast ip address, in my case 192.168.3.255 (this value is accepted in the control panel) > Doesn't work

- Set the IP settings of my home server to automatic. Create a DHCP reservation in the D-Link and forward UDP port 9 to the reserved IP address > Doesn't work

- Place my server in the DMZ with DHCP reservation in the D-Link > Doesn't work

Any ideas

[FurryNutz]

Could try this and see if it helps:
http://forums.dlink.com/index.php?topic=37018.0

Then again, these Modems might not support WOL...

Let us know if it works.

[lucien62]

Tried this method already (dhcp reservation and port forwarding) but no luck.

[FurryNutz]

I would phone contact your regional local D-Link support office, advanced level 2 or higher and see if this model is supporting of WOL and if it is, get detailed information on how to set it up.

Let us know what they say.