Topic: dir-601/dir-835 connection problem (Read 4012 times)

chevyman · « **on:** January 06, 2013, 06:04:03 AM »

Hi, I have an IBM thinkpad T43 with an Intel 802.11bg wireless Modem and windows xp servace pack 3. It connects to my DIR-601 perfectly but when I try to connect to my DIR-835 it says, waiting for the network. Even after a furmware update still same problem, It sees it but just won't connect. Tryed changing wireless mode from mixed BG and N to just B and G, no differents. Old router worked on mixed BG and N for 2 years. Any help would be greatly appreciated.

FurryNutz · « **Reply #1 on:** January 07, 2013, 07:35:55 AM »

Link>Welcome!
What Hardware version is your router? Look at sticker under router.
Link>What Firmware version is currently loaded? Found on routers web page under status.
What region are you located?

Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto.

Try disabling ALL Wifi security on the 835 and test to see if the device will connect then.

FurryNutz · « **Reply #2 on:** January 16, 2013, 07:39:31 AM »

Any status on this

D-Link Forums

News:

Author Topic: dir-601/dir-835 connection problem (Read 4012 times)

chevyman

dir-601/dir-835 connection problem

FurryNutz

Re: dir-601/dir-835 connection problem

FurryNutz

Re: dir-601/dir-835 connection problem