• November 02, 2025, 11:49:35 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2

Author Topic: FTP Server PASV Mode Setting  (Read 12897 times)

seijai98

  • Level 1 Member
  • *
  • Posts: 9
FTP Server PASV Mode Setting
« on: April 25, 2009, 01:13:07 PM »
i found out i cannot set any PASV port in DNS-323, my ftp server doesnt work thur router now, what i sould do? i am using DIR-655 router as well, thank you!
Logged

fordem

  • Level 10 Member
  • *****
  • Posts: 2168
Re: FTP Server PASV Mode Setting
« Reply #1 on: April 25, 2009, 01:30:37 PM »
Since you cannot set the passive port range, you are effectively limited to active ftp, which will probably only work on port 21 (this is dependent on the router if any at the client end)
Logged
RAID1 is for disk redundancy - NOT data backup - don't confuse the two.

seijai98

  • Level 1 Member
  • *
  • Posts: 9
Re: FTP Server PASV Mode Setting
« Reply #2 on: April 25, 2009, 02:03:30 PM »
sigh.. there's a port setting but don't have pasv mode.. i did try to install fun_plug but it doesnt work
Logged

Toink

  • Level 1 Member
  • *
  • Posts: 5
Re: FTP Server PASV Mode Setting
« Reply #3 on: April 25, 2009, 04:34:17 PM »
Have you tried my solution HERE
Logged

seijai98

  • Level 1 Member
  • *
  • Posts: 9
Re: FTP Server PASV Mode Setting
« Reply #4 on: April 25, 2009, 04:57:34 PM »
there's no pasv port i can set, i cant do port forward
Logged

fordem

  • Level 10 Member
  • *****
  • Posts: 2168
Re: FTP Server PASV Mode Setting
« Reply #5 on: April 25, 2009, 06:20:22 PM »
Quote from: seijai98 on April 25, 2009, 04:57:34 PM
there's no pasv port i can set, i cant do port forward

What makes you think that because you can't set a pasv port range you can't port forward?
« Last Edit: April 25, 2009, 06:32:14 PM by fordem »
Logged
RAID1 is for disk redundancy - NOT data backup - don't confuse the two.

seijai98

  • Level 1 Member
  • *
  • Posts: 9
Re: FTP Server PASV Mode Setting
« Reply #6 on: April 26, 2009, 04:55:52 AM »
i have try fun_plug, but doesn't work
i did put the pure-ftpd.sh to /ffp/start/ and set it correctly, but still can't list the file, i am using port 22288 and 22289-22900 for pasv port, i am currently using dir-655 and did port forward also, any suggestion? thanks
Logged

fordem

  • Level 10 Member
  • *****
  • Posts: 2168
Re: FTP Server PASV Mode Setting
« Reply #7 on: April 26, 2009, 08:37:08 AM »
Use active ftp.
Logged
RAID1 is for disk redundancy - NOT data backup - don't confuse the two.

seijai98

  • Level 1 Member
  • *
  • Posts: 9
Re: FTP Server PASV Mode Setting
« Reply #8 on: April 26, 2009, 09:34:54 AM »
of cause i am using active mode
Logged

fordem

  • Level 10 Member
  • *****
  • Posts: 2168
Re: FTP Server PASV Mode Setting
« Reply #9 on: April 26, 2009, 05:16:49 PM »
Quote from: seijai98 on April 26, 2009, 09:34:54 AM
of cause i am using active mode

Is it working with active mode?
Logged
RAID1 is for disk redundancy - NOT data backup - don't confuse the two.

sgip2000

  • Level 2 Member
  • **
  • Posts: 77
Re: FTP Server PASV Mode Setting
« Reply #10 on: April 28, 2009, 09:28:43 AM »
I still haven't gotten the FTP to work for me either.
Logged

seijai98

  • Level 1 Member
  • *
  • Posts: 9
Re: FTP Server PASV Mode Setting
« Reply #11 on: April 28, 2009, 11:30:44 AM »
yes, dlink i love you!!!!
« Last Edit: April 28, 2009, 12:33:18 PM by D-Link Multimedia »
Logged

D-Link Multimedia

  • Poweruser
  • Level 7 Member
  • **
  • Posts: 1066
    • D-link Systems, Inc.
Re: FTP Server PASV Mode Setting
« Reply #12 on: April 28, 2009, 12:34:27 PM »
Quote from: seijai98 on April 28, 2009, 11:30:44 AM
yes, dlink i love you!!!!

Why thank you! Lol.

In all seriousness, this is a support forum so if you are here to flame you will be removed.

As a side note PASV port ranges will be editable in 1.08.
Logged

seijai98

  • Level 1 Member
  • *
  • Posts: 9
Re: FTP Server PASV Mode Setting
« Reply #13 on: April 28, 2009, 11:11:48 PM »
finally the support appear, and glad to hear that will be pasv mode setting support in 1.08, thank you!!!!!!
but when will available?
Logged

lizzi555

  • Level 5 Member
  • *****
  • Posts: 605
Re: FTP Server PASV Mode Setting
« Reply #14 on: May 01, 2009, 02:54:56 AM »
Most routers as the DIR-655 will recognize the passive ports automatically with its FTP ALG - no need to forward them.
At least earlier Firmwares of DNS-323 used the ports 65501-65510 TCP for passive transfer. You can try to forward them.
http://wiki.dns323.info/howto:open_ports_ftpd
« Last Edit: May 01, 2009, 02:57:28 AM by lizzi555 »
Logged
Pages: [1] 2
« previous next »