• February 23, 2025, 04:01:49 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: how do i reset my router??  (Read 7586 times)

justin lilley

  • Level 1 Member
  • *
  • Posts: 10
how do i reset my router??
« on: January 22, 2013, 04:39:59 PM »
my cable company tells me my router is not refreshing ?? even after i disconnect - reconnect ..the power   is the button on top with the circling arrows for refreshing it .. i do have a static IP if that makes a difference .. help .. new to this ... thanks
« Last Edit: January 22, 2013, 04:47:20 PM by justin lilley »
Logged

Hard Harry

  • Guest
Re: how do i reset my router??
« Reply #1 on: January 22, 2013, 05:54:25 PM »
No, the button on the side with the two arrows (as seen here) is for WPS and not relevant. A power cycle should be sufficient for anything I can think of.

Tell me more about your problem:
1. Who is your ISP?
2. What kind of modem do you have?
3. What is the symptom? Cant get online? Cant access something on your network remotely? Problem with console? Etc
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: how do i reset my router??
« Reply #2 on: January 22, 2013, 06:02:55 PM »
What Hardware version is your router? Look at sticker under router.
Link>What Firmware version is currently loaded? Found on routers web page under status.
What region are you located?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

justin lilley

  • Level 1 Member
  • *
  • Posts: 10
Re: how do i reset my router??
« Reply #3 on: January 22, 2013, 06:34:48 PM »
Quote from: FurryNutz on January 22, 2013, 06:02:55 PM
What Hardware version is your router? Look at sticker under router.
Link>What Firmware version is currently loaded? Found on routers web page under status.
What region are you located?

Hardware Version: B1   Firmware Version: 2.07NA  i have three computers .. and a wd sentinel server .. the server IP was added to the router as reserved.. when i do any torrent downloading all computers except my torrent connected one and my server  ..go down and wont reconnect to the internet they can't detect proxy settings ??  now when i get my cable provider to refresh my static IP they tell me my router is not refreshing  ..my windows diagnostics tells me its my provider ... my provider tells me its my  router  or windows ..lol.  motorola modem
« Last Edit: January 22, 2013, 06:39:57 PM by justin lilley »
Logged

Hard Harry

  • Guest
Re: how do i reset my router??
« Reply #4 on: January 22, 2013, 06:45:48 PM »
Who is your ISP? Comcast? Time Warner?

When you say "the server IP was added to the router" do you mean you created a DHCP reservation for the 192 IP your server is using? Or do you mean your setting your server to use your static IP?

If you have a Static IP from your ISP, then that should be set Under your "Internet Settings" also known as your WAN IP. Also, if going from a DHCP IP to a Static IP, most ISP will require you to call them, and on request, will clear your ARP cache.

As for the internet working until you start a torrent, sounds like your downloader is using up all your bandwidth.
Logged

justin lilley

  • Level 1 Member
  • *
  • Posts: 10
Re: how do i reset my router??
« Reply #5 on: January 22, 2013, 06:57:15 PM »
Quote from: Hard Harry on January 22, 2013, 06:45:48 PM
Who is your ISP? Comcast? Time Warner?

When you say "the server IP was added to the router" do you mean you created a DHCP reservation for the 192 IP your server is using? Or do you mean your setting your server to use your static IP?

If you have a Static IP from your ISP, then that should be set Under your "Internet Settings" also known as your WAN IP. Also, if going from a DHCP IP to a Static IP, most ISP will require you to call them, and on request, will clear your ARP cache.

As for the internet working until you start a torrent, sounds like your downloader is using up all your bandwidth.


cable provider ..access communications   local cable provider  here in Regina , SK. Canada.. my IP is Static at provider  my settings in router are on static ..I down load on off peak hour so not to get throttled back my band width is 5 down 1 up  when i am downloading torrents ..yes i use the whole band width .. and its only in the morning when i go to log on my other machines ..i some times find only the main machine i was downloading on  and my server are still connecting ...i thought ARP cache is only on my home PC  , dose my provider also have my ARP cache ?? or do you mean ask provider to clear my CMTS ??
« Last Edit: January 22, 2013, 07:13:46 PM by justin lilley »
Logged

Hard Harry

  • Guest
Re: how do i reset my router??
« Reply #6 on: January 22, 2013, 07:07:59 PM »
Im not sure how to help. If your using a static IP, there is nothing to refresh. There is no DHCP lease to renew. And even if required, a power cycle should be all that is required. Only other then that is to do a Factory reset, but that will reset everything you have configured into the router. Sounds like its not a issue with the router or ISP, but the torrent downloader on your server. I would try the WD forums.
Logged

justin lilley

  • Level 1 Member
  • *
  • Posts: 10
Re: how do i reset my router??
« Reply #7 on: January 22, 2013, 07:17:37 PM »
Quote from: Hard Harry on January 22, 2013, 07:07:59 PM
Im not sure how to help. If your using a static IP, there is nothing to refresh. There is no DHCP lease to renew. And even if required, a power cycle should be all that is required. Only other then that is to do a Factory reset, but that will reset everything you have configured into the router. Sounds like its not a issue with the router or ISP, but the torrent downloader on your server. I would try the WD forums.

 was happening befor i got the server .torrent downloader on my main PC Utorrent. i will try refreshing my modem again ...thnx
« Last Edit: January 22, 2013, 07:20:54 PM by justin lilley »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: how do i reset my router??
« Reply #8 on: March 07, 2013, 12:11:23 PM »
Any status on this?  ???
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.