• November 01, 2024, 08:37:58 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Looking for help with low LAN throughput to PS3  (Read 3847 times)

Hemigod702

  • Level 1 Member
  • *
  • Posts: 2
Looking for help with low LAN throughput to PS3
« on: March 17, 2013, 10:50:22 PM »

I'm hoping someone can offer some help!- My first wireless router, which I still have and works perfectly, was a DIR-601, A1, fw v1.00na. It has always been reliable and worked great, save for being a little weak on the signal range. Back when I got it I knew little about networking period, let alone wireless routers- so I never tweaked anything on it. Now it's almost 4 years later. Being a little more knowledgable, and my family creating A LOT more traffic on my network, I decided some upgrades were in order. First I called COX to upgrade my speed too, which led me to having to purchase a new Motorolla SB6121 modem- and everything was great. However, aside from the same old dead spots in my house,  I was starting to realize the limitations of my 601 with regards to handling the traffic load. Since I never had an issue with my 601, I decided to stay loyal to D-Link. After, albeit, a small amount of research... I decided on the 655. It fit the budget, and I read some decent reviews on it regarding gaming. Plus, from what I've read, I didn't really see any benifit to justify a dual band router for what I do. Anyway, my new 655, B1, fw v2.05NA has solved all of my wireless issues and handles our traffic perfectly, except for one slight problem- my wired PS3. I have Cox ultimate, which here in Nevada is up to 150Mbps, and wired my laptop is getting 107Mbps download- pretty consistently with the 655, and around 100 with the 601. My PS3 on the other hand, went from 27 to 32Mbps wired with my 601, to only getting 8 to 15Mbps wired to the 655- and a lot of lag on certain online games. It seems that out of all of our devices, my PS3 is the only one that doesn't like the 655. I really hesitate to DMZ my PS because of the risks, but at this point I'm almost desperate enough to try anything. I hooked the 601 back up for now for the PS3 performance...but we are REALLY missing the wireless and traffic handling performance of the 655! Is there a way to have the best of both, or did I just buy the wrong model of D-Link? Any advice would be greatly appreciated!
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Looking for help with low LAN throughput to PS3
« Reply #1 on: March 18, 2013, 07:08:05 AM »

Link>Welcome!

Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router.
Turn off ALL QoS or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options. Advanced/QoS or Gamefuel.
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual or under Setup/PARENTAL CONTROL/Set to>None: Static IP or Obtain Automatically From ISP.
Enable Use Unicasting (compatibility for some ISP DHCP Servers) under Setup/Internet/Manual.
Turn on DNS Relay under Setup/Networking.
Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting.
Ensure devices are set to auto obtain an IP address.
If IPv6 is an option on the router, select Local Connection Only or Disable IPv6 options under Setup/IPv6.
Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
Enable uPnP and IPv4 Multi-cast Streaming under Advanced/Networking. Disable uPnP for testing Port Forwarding rules. Disable IPv6 Multi-cast Streaming.
Turn off WISH, and WPS under Advanced.
WAN Port Speed set to Auto or specific speed? Some newer ISP modems support 1000Mb so manually setting to Gb speeds can be supported by the router. Advanced/Advanced Networking/WAN Port Speed
Set current Time Zone, Date and Time. Use an NTP server feature. Tools/Time.

Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired PC while testing.

Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.

You should review this for PSN and QoS:
Gaming and QoS for PlayStation
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Hemigod702

  • Level 1 Member
  • *
  • Posts: 2
Re: Looking for help with low LAN throughput to PS3
« Reply #2 on: March 18, 2013, 08:40:37 AM »

Thanks for the quick response! I'll check out that link and give those settings a try as soon as I can and let you know how it goes.
Link>Welcome!

Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router.
Turn off ALL QoS or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options. Advanced/QoS or Gamefuel.
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual or under Setup/PARENTAL CONTROL/Set to>None: Static IP or Obtain Automatically From ISP.
Enable Use Unicasting (compatibility for some ISP DHCP Servers) under Setup/Internet/Manual.
Turn on DNS Relay under Setup/Networking.
Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting.
Ensure devices are set to auto obtain an IP address.
If IPv6 is an option on the router, select Local Connection Only or Disable IPv6 options under Setup/IPv6.
Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
Enable uPnP and IPv4 Multi-cast Streaming under Advanced/Networking. Disable uPnP for testing Port Forwarding rules. Disable IPv6 Multi-cast Streaming.
Turn off WISH, and WPS under Advanced.
WAN Port Speed set to Auto or specific speed? Some newer ISP modems support 1000Mb so manually setting to Gb speeds can be supported by the router. Advanced/Advanced Networking/WAN Port Speed
Set current Time Zone, Date and Time. Use an NTP server feature. Tools/Time.

Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired PC while testing.

Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.

You should review this for PSN and QoS:
Gaming and QoS for PlayStation
Logged