1] what is the general operating temp? I find it 107 -115. Is 115 ok?
w/seagate 1.5TB
2] can i remove a full volume, ( JBOD setup ) install and format a new hard drive, use it and then remove that drive to re-install the original drive, when i want to access the data on that original drive. I understand that both drives will be called the same volume and that the drive will need to be inserted in the same slot, but otherwise, will the data be intact and all the past shares be usable?
3] Will the missing drive have created confusion in sharing new folders?
4] The USB port can be used for a printer, external drive, or UPS, correct? Can i use a USB hub to plug one of each into the DNS 343?
5] If the drives are set to go to standby after five minutes, does that sufficiently reduce the wear on the drives, so as to last much longer. I am using mostly for data archiving. Wondering if i should turn on system only when needed, or keep on?
6] If i connect a usb drive, does the DNS 343 format and mange the discs the same way as internal drives?
Can the USB drive be moved to another DNS and be able to access data?
7] If in the future the DNS fails, but the drives are still good, what methods and machines would i be able to still access data, without having to find another DNS box?
8] If power fails, UPS dies, and then power is restored, the unit can either stay down, or come back up.
IF it is set to come back up, and the ups, not having time to recharge, again experiences a power outage, how will the sudden power loss affect the DNS, and affect the drives? Will it most likely be ok, or serious?
9] If i wanted to duplicate the data on my 343 to another 343 at another LAN, could i remove the drives, clone them, and insert the second set into a second unit, or must they be copied over the LAN. I would be using a disc cloning device, not an operating system to create a mirror disc.