• October 25, 2025, 11:20:42 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Camera responding to Router management IP  (Read 11036 times)

BrokenOne

  • Level 1 Member
  • *
  • Posts: 5
Camera responding to Router management IP
« on: May 19, 2013, 09:28:45 AM »
Hello All,

When attempting to log onto my router webUI I noticed that my Dlink DCS-932L responds to the request. So now I can only log into the 932L and not my router. I now need to turn off my 932L and then I can log into my router. So this is a bit annoying as you can see. I even changed the gateway address on the router to a different IP and the 932L will respond on the new address. I also set the ARP table with no luck.

I am looking for a workaround so I can access my router WEBUI and not have the 932L respond. Thanks in advance.
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Camera responding to Router management IP
« Reply #1 on: May 31, 2013, 07:31:03 AM »
What brand/model router do you own?
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

BrokenOne

  • Level 1 Member
  • *
  • Posts: 5
Re: Camera responding to Router management IP
« Reply #2 on: May 31, 2013, 10:50:42 PM »
It is a Cisco EA3500.
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Camera responding to Router management IP
« Reply #3 on: June 01, 2013, 07:33:30 AM »
Are you saying that when you open the Web UI to view the router settings, that the DCS-932L web UI opens instead?  If this is the case, did the DCS-932L always behave this way or is this something new?
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Camera responding to Router management IP
« Reply #4 on: June 19, 2013, 10:22:53 AM »
Any update on this issue?
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

BrokenOne

  • Level 1 Member
  • *
  • Posts: 5
Re: Camera responding to Router management IP
« Reply #5 on: June 29, 2013, 02:53:21 PM »
Sorry been AFK.

Are you saying that when you open the Web UI to view the router settings, that the DCS-932L web UI opens instead? - Yes.

If this is the case, did the DCS-932L always behave this way or is this something new? - Day one when I plugged it into my network.
Logged

acellier

  • Level 4 Member
  • ****
  • Posts: 417
Re: Camera responding to Router management IP
« Reply #6 on: June 29, 2013, 06:14:57 PM »
it sounds like maybe your router is 192.168.0.20, that is the camera's native ip address?
can you (with camera disconnected) set the router for a different base address?
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
Re: Camera responding to Router management IP
« Reply #7 on: June 29, 2013, 06:24:28 PM »
Quote from: BrokenOne on June 29, 2013, 02:53:21 PM
Sorry been AFK.

Are you saying that when you open the Web UI to view the router settings, that the DCS-932L web UI opens instead? - Yes.

If this is the case, did the DCS-932L always behave this way or is this something new? - Day one when I plugged it into my network.
[/quote

I'm with acellier... what is your camera's local IP and what is your router's local IP?

Have you tried a different browser?


http://www.manualowl.com/m/Cisco/EA3500/Manual/274650

page 20 says you should be using 192.1.168.1 or myrouter.local for your router ...


Logged

BrokenOne

  • Level 1 Member
  • *
  • Posts: 5
Re: Camera responding to Router management IP
« Reply #8 on: July 19, 2013, 10:57:56 AM »
Camera is 192.168.1.119

Router is 192.168.1.1

I even changed the router IP to 192.168.1.2. When I do that the camera will respond to both 192.168.1.119 and 192.168.1.2. Also the ARP table is correct.

I can reproduce the issue with different browsers, different PCs and different OSs.
Logged

acellier

  • Level 4 Member
  • ****
  • Posts: 417
Re: Camera responding to Router management IP
« Reply #9 on: July 19, 2013, 06:45:48 PM »
And Cisco/Linksys says what ???
Seems to me the router is responsible to communicate properly with associated devices ...
« Last Edit: July 19, 2013, 06:50:04 PM by acellier »
Logged

BrokenOne

  • Level 1 Member
  • *
  • Posts: 5
Re: Camera responding to Router management IP
« Reply #10 on: July 19, 2013, 11:51:13 PM »
Interesting enough I disabled UPnP on the router. The issue is now resolved.
« Last Edit: July 20, 2013, 08:05:13 AM by BrokenOne »
Logged

acellier

  • Level 4 Member
  • ****
  • Posts: 417
Re: Camera responding to Router management IP
« Reply #11 on: July 20, 2013, 01:50:23 PM »
glad to hear it!
Logged