Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[lezde716]

in the guide provided by d-link the traffic shaping is only set to only one interface "wan1". So what about if I set my dfl-800 to dual wan failover and both wan has a different bandwidth. wan1 has 6mb and wan2 has upto 5mb. how can i set my traffic shaping?

[chechito]

you must create independent pipes and pipe rules to traffic on each interface.

[sergiomnt]

Hello,

You can do this by Rule of Traffic Shaping, but for this to work your Failover must be ok.

Thank you.
Sérgio de Souza
sergio@masternet.com.br

[lezde716]

The following are example of my rules:
 
1    drop_smb-all    Drop    lan    lannet    wans     all-nets    smb-all
2    allow_http            NAT    lan    lannet    wans     all-nets    http-all
3    allow_dns            NAT    lan    lannet    wans     all-nets    dns-all
4    allow_ntp            NAT    lan    lannet    wans     all-nets    ntp

In the Interface Group under Interfaces I made a group called wans which is compose of wan1 and wan2.
With this configuration the traffic transfer automatically from the wan2, but as I said you have to manually remove the cable from wan1 port to be able to detour the traffic.

may you have some ideas or suggestion regarding my problem.