Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[MacktheKnife]

hello guys

i'm experiencing difficulties in uploading video files (or just heavy files with other formats) through remote web access to USB drive attached to dlink 826L router (http://22.245.23.55:8181)

uploading/downloading photos is easy and smooth, but when comes video file 100 mb for example, its starts but never finish it

thanks in advance for advice

[FurryNutz]

Link>Welcome!

• What Hardware version is your router? Look at sticker under router.
• Link>What Firmware version is currently loaded? Found on routers web page under status.
• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?
• Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values
• For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.

[MacktheKnife]

thanks for quick response

its A1,  firmware1.01 (CN), we are in china

regarding ISP we just have a cable to which we had connected 826L.

sorry to say but u advise to check mtu i;m not quite understand how to do it.. and tryied to make ping yahoo without any result.. strange, small files can still exchange successfully, its only about big files..

[FurryNutz]

Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router.

• Turn off ALL QoS or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options, Advanced/QoS or Gamefuel.
• Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual or under Setup/PARENTAL CONTROL/Set to>None: Static IP or Obtain Automatically From ISP.
• Enable Use Unicasting (compatibility for some ISP DHCP Servers) under Setup/Internet/Manual.
• Turn on DNS Relay under Setup/Networking. Link>Finding Faster DNS Addresses using Name Bench
• Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting.
• Ensure devices are set to auto obtain an IP address.
• If IPv6 is an option on the router, select Local Connection Only or Disable IPv6 options under Setup/IPv6.
• Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
• Enable uPnP and Multi-cast Streaming under Advanced/Networking. Disable uPnP for testing Port Forwarding rules. Enable IPv6 Multi-cast Streaming for routers that have a Media Server option. Disable IPv6 Multi-cast Streaming if IPv6 or Media Server is not being used.
• Turn off WISH, and WPS under Advanced.
• WAN Port Speed set to Auto or specific speed? Some newer ISP modems support 1000Mb so manually setting to Gb speeds can be supported by the router. Advanced/Advanced Networking/WAN Port Speed
• Set current Time Zone, Date and Time. Use an NTP Server feature. Tools/Time.

[MacktheKnife]

thanks for detailed advise!

though routers menu all in chinese.. i managed to check and follow ur words, all as u said correct

.. tried to send 180 mb - successfully! but after tried 450 mb and it stoped by no reason after 20 %...

[FurryNutz]

Are there others online while you are sending to the router and USB drive?
Ensure your 3rd party security PC programs are temporarily disabled while xfer'g files.

I recommend that you might want to phone contact your regional D-Link support, ask for level 2 or higher and see.

This seems to be a possible problem either with the ISP possibly or the router.

Let us know how it goes.