Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

I do with my 868L, will see how the 5500 holds up. Its going to get hammered.   Taking it to a XBL LAN Party tomorrow at my friends place. Should be a great test.

[ASTRO_Henry]

Got my DGL-5500 yesterday 8/1/2013. Been playing around with it, have not port forwarding yet and both Black Ops II and Halo 4 are moderate for some reason.

Modem - SB6141 - 15  DOWN  and 1  UP

ISP - TWC (Earthlink)

Firewall Settings:

SPI off (default)

Anti-Spoof off (default)

Router Settings:

DNS Relay ON (default)

Streamboost:

StreamBoost Bandwidth Control ON (default)

UPNP off (on default)

Tested bandwidth:

Down - 13.03

Up - 1.04

Opted in for Streamboost automatic updates (off default)

Wireless settings:

2.4ghz -  Auto Channel Scan off (ON default)

5.0ghz -  Auto Channel Scan off (ON default)

[FurryNutz]

Try resetting the XBL Network settings, power them OFF then back on one at a time then reserve the IP address for each on the router?

Got my DGL-5500 yesterday 8/1/2013. Been playing around with it, have not port forwarding yet and both Black Ops II and Halo 4 are moderate for some reason.

Modem - SB6141 - 15  DOWN  and 1  UP

ISP - TWC (Earthlink)

Firewall Settings:

SPI off (default)

Anti-Spoof off (default)

Router Settings:

DNS Relay ON (default)

Streamboost:

StreamBoost Bandwidth Control ON (default)

UPNP off (on default)

Tested bandwidth:

Down - 13.03

Up - 1.04

Opted in for Streamboost automatic updates (default)

[ASTRO_Henry]

Would having both 2.4ghz and 5.0ghz BOTH on at the same time conflict with each other?

Wireless settings:

2.4ghz -  Auto Channel Scan off (ON default)

5.0ghz -  Auto Channel Scan off (ON default)

All Clients are reserved and I currently have My Xbox 360, PC , iPhone and my sister's PC reserved.

[FurryNutz]

No they shouldn't conflict.

You need to enable uPnP though. This will probably help. Turn OFF the xboxes first before re-enabling uPnP.

[motherfo]

Are they working on fixing that emulator so I can see what I'm missing

[FurryNutz]

You just need to go get one sir. You'll love it. LOL.  

I presume they will. I'll ask again. Soon as I get time, I'll post captures here in the forum in mean time, of all the pages.

Besides you need to update your WOL sticky to reflect any changes needed if the DGL-5500 is used. 

[Ritzie]

I'm having some issues setting up static ip addresses in the dhcp reservation section. I setup about 20 selected save and then a restart. Well it never comes back up. I have to power the unit off/on before I can access the router. I tried again added about 5, this time I selected save and I think it says restart later. Same thing happens I cannot access the router.

[FurryNutz]

Link>Welcome!

• What region are you located?

3rd Party Security Software Configurations

• Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
• Turn off all devices accept for one wired PC while testing.

What browser are you using?
Try Opera or FF? If IE 8 or 9, set compatibility mode and test again.
Try turning off these features in Chrome:
Top right corner, little bars for options > Settings > Settings (on left) > Show advanced settings.
Uncheck these:
Use a web service to help resolve navigation errors
Use a prediction service to help complete searches and URLs typed in the address bar
Predict network actions to improve page load performance
Enable phishing and malware protection

I'm having some issues setting up static ip addresses in the dhcp reservation section. I setup about 20 selected save and then a restart. Well it never comes back up. I have to power the unit off/on before I can access the router. I tried again added about 5, this time I selected save and I think it says restart later. Same thing happens I cannot access the router.

[ASTRO_Henry]

hey furry. Did what you asked. Edit settings on router, tuned off xbox, restart router with UPNP, Xbox on started up halo 4 and black ops 2 still moderate.

Reset router to default, my TESTED BANDWIDTH changed to DOWN 14.81 and UP 1.04, OPTED in to Streamboost updates, Reserved all Clients, XBOX 360 as my top priority, DNS relay ON, UPNP ON, only have 2.4 ON because I don't have any products that use 5.0ghz, and basically everything I listed before. Still moderate.

[FurryNutz]

Did you reset the xbox as well before turning them off?

How are the xboxes connected? Wire or wireless?

hey furry. Did what you asked. Edit settings on router, tuned off xbox, restart router with UPNP, Xbox on started up halo 4 and black ops 2 still moderate.

Reset router to default, my TESTED BANDWIDTH changed to DOWN 14.81 and UP 1.04, OPTED in to Streamboost updates, Reserved all Clients, XBOX 360 as my top priority, DNS relay ON, UPNP ON, only have 2.4 ON because I don't have any products that use 5.0ghz, and basically everything I listed before. Still moderate.

[ASTRO_Henry]

I reset it to factory defaults just now and just booted halo 4 same thing moderate.

[ASTRO_Henry]

Did you reset the xbox as well before turning them off?

How are the xboxes connected? Wire or wireless?

My Xbox 360 and PC are WIRED while iPhone is WIRELESS. Yes I turned Xbox off first and then the router always.

[FurryNutz]

Hmmm...interesting...should be OPEN. Only thing I would do is Power off the ISP Modem and Factory reset the 5500. Power off all xboxes. Power ON the ISP modem after you hit Factory reset on the 5500, set up the 5500 SSID and PW for 2.4ghz, turn OFF 5Ghz radio. Let the modem and router sync then power ON one xbox and check NAT status.

Does you ISP have any ISP DNS features like Comcast does?

 

I reset it to factort defaults just now and just booted halo 4 same thing moderate.

[Ritzie]

Link>Welcome!

• What region are you located?

3rd Party Security Software Configurations

• Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
• Turn off all devices accept for one wired PC while testing.

What browser are you using?
Try Opera or FF? If IE 8 or 9, set compatibility mode and test again.
Try turning off these features in Chrome:
Top right corner, little bars for options > Settings > Settings (on left) > Show advanced settings.
Uncheck these:
Use a web service to help resolve navigation errors
Use a prediction service to help complete searches and URLs typed in the address bar
Predict network actions to improve page load performance
Enable phishing and malware protection

Thanks for your help!
I'm located in the US
I have tried FF, Safari, Chrome and IE 9.
I don't have any AV installed on my Mac. I've been getting 500 - Internal Server Error also. Firewall service is turned off on my PC.
At the time the other devices were off but I'll double check.