Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

Firmware: 1.10b04NA      09/04/2013 NA Only!
Release Notes:
Problems Resolved & Enhancements:
 1. Fixed: Browser Compatibility for:
     -http://dlinkrouter.local
     -http://192.168.0.1
     -using QRS Mobile
 2. Fixed: Formatting in DHCP table
 3. Fixed: Updated WLAN Driver for stability
 4. Fixed: ACL rule can be deleted
 5. Fixed: MAC Filtering can On/Off even if rules exist
 6. Fixed: MAC Filtering config requiring reboot
 7. Added: Syslog under Status->Logs  
 8. Added: Dynamic DNS under Advanced->DMZ
 9. Added: 5GHz Bursting as Default Enabled
 10. Added: WPS-PIN/PBC (for Win8.1 Logo, WPS logo)
 11. Added: Auto 20/40Mhz 2.4GHz Co-existence
 12. Performance Tuning: LAN-WAN QOS
 13. Performance Tuning: 'my network map'
 14. Improved: MAC Filtering GUI Table formatting
 15. Improved: Inc. to 25 entries/page in Log
 16. Improved: Setup wizard bandwidth testing
 17. Improved: GUI Layout and Graphics
 18. Improved: Factory Default Setup Wizard behavior
 19. Improved: Web GUI for setting wireless encryption method
 20. Improved: User feedback messages
     - Page return flow when press cancel
     - Add Ok button to 'Warning' messages
     - Prompt saving setting when press cancel
     - Prompt saving when user abandons page
 22. Improved: Correct DHCP Reservation Table Labels
 23. Improved: Correct DHCP Reservation IP management
 24. Improved: Correct DHCP Reservation GUI Button Improvements
 25. Remove: "802.11b only" mode in 2.4GHz.
 26. Remove: Guest field in wireless status page.


Get it here:
DGL-5500

NOTE: I HIGHLY RECOMMEND DOING A FACTORY RESET BEFORE SENDING THE FW FILE, THEN ONE MORE AFTER SENDING THE FW FILE, THEN SET UP THE ROUTER FROM SCRATCH WITH OUT RE-LOADING ANY SAVED CONFIG FILES. Reason being is that there are many new features and changes to the router and loading a previously saved configuration from file could and might cause problems due to the differences in changes. Please set up the router from scratch after loading the new FW and doing one more factory reset.

Follow this for updating:
FW Update Process

Do NOT upgrade firmware on any D-Link product over a wireless connection.
Failure of the device may result. Use only hard-wired LAN network connections.