Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[RYAT3]

Too many connections in use on 1 of my 2230s.

Might be time to reboot it?

It quit doing the auto icr a week ago and has been stuck in night mode. I don't see any unknown connections on my other 2230s.

[RYAT3]

Well.. started trouble shooting. .
Was able to connect to external ip on local network.
Also internal ip.

Log file kept timing out.
SD card stopped recording 12/3 at 4pm.
Pulled sd card to view. 
Rebooted device through f/w. Can't reconnect.
Power cycled. . Still can't connect through wireless.

Going To attach to ethernet cable next and post update later.

Oh yeah reboot & power cycle appeared normal startup. .. ir cut on off.  Power & led lights off.

So I just hope the network settings are only hosed for Some reason

[RYAT3]

Attached to ethernet cable. . Worked like a champ.  Turned on wireless to my network. . Didn't work.. network loss/reconnect messages in Log.

Reentered password.. Pulled ethernet. .

Works.

Put sd card back in. . Set up 24x7 recording. . Everything looks good again. 

Logs look fine. . It's like the camera just gummed up and gave up.  F/w 1.10.

The Other 2230 next to it has shown no symptoms.

[belvedere]

Thanks for the post.  I had nothing to offer in response that would help you, but I have seen this once.  I'm not sure how I got it into that state.  Other than that it has been a stable (if buggy) camera.

Just wanted to let you know that some of us out there are reading even if we can't help.

[RYAT3]

Thanks.  Hopefully it helps someone else out with a 503.

I found nothing in forums about 503 errors except on a router.

Thanks for the post.  I had nothing to offer in response that would help you, but I have seen this once.  I'm not sure how I got it into that state.  Other than that it has been a stable (if buggy) camera.

Just wanted to let you know that some of us out there are reading even if we can't help.