Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[hohjoj]

Hello. I decided to change my "Pre-shared Key" password(because it was way to long, the default one) so i went to Setup>Wireless Settings>Manual Wireless Network Setup>Pre-Shared Key after changing the password everything seemed normal then i went to my 3ds to test if it works so apparently it didn't so i went to test my internet connection and it was not working after that i decided to reboot device and do everything from the beginning but at the bottom of the screen, at network icon appeared exclamation mark. When i finished all the setup's the exclamation mark was still there and still my internet connection was down. I tried everything but nothing workt out. It worked 2 weeks perfectly until this password changing...

Sorry for my english.

[FurryNutz]

Link>Welcome!

• What Hardware version is your router? Look at sticker under router.
• Link>What Firmware version is currently loaded? Found on the routers web page under status.
• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?

Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy

• Ensure the default (dlink) SSID name is changed. Can be anything and not something thats already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
• What wireless modes are you using?
• 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
• Channel Width set for Auto 20/40Mhz or try 20Mhz only.
• Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
• What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
• What wireless devices do you have connected?

Be sure to reconfigure any WiFi profile presets that are on the devices as well. If you change the PW on the router, passwords in saved profiles will need to be changed or re-setup as well.

[hohjoj]

E4. 5.10RU. So i tried to update firmware it didn't workt out...
Tried even other your mentioned things still nothing...
And i noticed that my secondary dns server is blank and advanced dns is disabled is this a problem?

[FurryNutz]

Is DNS Relay enabled under Setup/Networking?

Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router.

• Turn off ALL QoS or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options, Advanced/QoS or Gamefuel.
• Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual or under Setup/PARENTAL CONTROL/Set to>None: Static IP or Obtain Automatically From ISP.
• Enable Use Unicasting (compatibility for some ISP DHCP Servers) under Setup/Internet/Manual.
• Turn on DNS Relay under Setup/Networking. Link>Finding Faster DNS Addresses using Name Bench[/url]
• Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting.
• Ensure devices are set to auto obtain an IP address.
• If IPv6 is an option on the router, select Local Connection Only or Disable IPv6 options under Setup/IPv6.
• Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI to test.
• Enable uPnP and Multi-cast Streaming under Advanced/Networking. Disable uPnP for testing Port Forwarding rules. Enable IPv6 Multi-cast Streaming for routers that have a Media Server option. Disable IPv6 Multi-cast Streaming if IPv6 or Media Server is not being used.
• Turn off WISH, and WPS under Advanced.
• WAN Port Speed set to Auto or specific speed? Some newer ISP modems support 1000Mb so manually setting to Gb speeds can be supported by the router. Advanced/Advanced Networking/WAN Port Speed
• Set current Time Zone, Date and Time. Use an NTP Server feature. Tools/Time.

[hohjoj]

The DNS was disabled but still nothing works even with your all mentioned configurations.

[FurryNutz]

Are you getting any status and IPs under Status/Device Info/Wan section?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?

[hohjoj]

Here is the status http://i.imgur.com/W8BmBT6.png
I have cabled service.

[FurryNutz]

• If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>Double NAT and How NAT Works. To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ.
  Example of a D-Link router configured for PPPoE with ISP Modem bridged: PPPoE Configuration on Router
• Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values
• For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.

Is there a cable modem before the 615 router or a cable that connects the router from a wall outlet? The 615 is getting an private IP address, recommend a public IP address if possible.

[hohjoj]

Nop those thinks dont work.
No there is nothing before 615 at my home, my ISP have locked something(no idea what it is, i have no access to it).

[FurryNutz]

I recommend that you contact the ISP and have them check your signal and status or phone contact your regional D-Link support office and ask for help with this.