Topic: wireless 2.4 only connecting at 72.2 (Read 4622 times)

cmartell1978 · « **on:** January 25, 2014, 08:21:25 AM »

Tried 3 different laptops, 2 running windows 7, 1 running windows 8 and can only get all wireless cards to connect at 72.2MBps. Any ideas??

thanks in advance

FurryNutz · « **Reply #1 on:** January 25, 2014, 08:38:27 AM »

What is the distance between the router and wireless devies?

What wireless modes are you using?
2.4Ghz Routers only: Try single mode N
Channel Width set for Auto 20/40Mhz.
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
Any cordless house phones?
Any other WiFi routers in the area? Link> Use InSSIDer to find out. How many?
If you have any of these options, Try turning OFF Short GI, HT 20/40 Co-exhistance.

cmartell1978 · « **Reply #2 on:** January 25, 2014, 08:55:52 AM »

\i have tried mixed, single mode, and just N. Channel width is at 20/40.
I have tried auto channel (which defaults to 6) and manual channel 11.
I tried wpa2 with aes, as well as auto wpa/wpa2. 1 cordless house phone a level away in the house.
I will try to turn off short gi, as well as ht 20/40 Co-exhistance...... what do either one of them do?

thanks in advance Furry for all ur help!!

FurryNutz · « **Reply #3 on:** January 25, 2014, 09:23:04 AM »

HT20/40 is apart of this: Good Neighbour Policy

D-Link Forums

News:

Author Topic: wireless 2.4 only connecting at 72.2 (Read 4622 times)

cmartell1978

wireless 2.4 only connecting at 72.2

FurryNutz

Re: wireless 2.4 only connecting at 72.2

cmartell1978

Re: wireless 2.4 only connecting at 72.2

FurryNutz

Re: wireless 2.4 only connecting at 72.2