Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jcgoobee]

Loaded about an hour ago. So far so good.

Be sure to back up your settings first before upgrading. Your router's setting will be wiped after the new firmware is loaded.

[altizzz]

Please advise me, where to download the firmware.
Many thanks

[karas]

Hello
jcgoobee you should download from:
http://www.dlink.com/products/support.asp?pid=530&sec=1#firmware
or from:
http://support.dlink.com/downloads/
 on the www.dlink.com is support section and you find there all stuff for dir-655 faq, downloads, etc etc
Krzysztof K.

[jgrove]

Loaded about an hour ago. So far so good.

Be sure to back up your settings first before upgrading. Your router's setting will be wiped after the new firmware is loaded.

Looking good, but cant see any difference, however the LAN speed seems a bit better, but that could be anything!

[jcgoobee]

ah... I was not the one who requested the link for download, but thanks anyway.

- JCGOOBEE

Hello
jcgoobee you should download from:
http://www.dlink.com/products/support.asp?pid=530&sec=1#firmware
or from:
http://support.dlink.com/downloads/
 on the www.dlink.com is support section and you find there all stuff for dir-655 faq, downloads, etc etc
Krzysztof K.

[Optix1180]

Great news ty..I will be updating today.   

[kckevin]

Does ALG return in this firmware?

[Skeptik]

Looking for European version of 1.10

[mb]

Does ALG return in this firmware?

No, all the previsouly configurable ALG settings are now enabled and no longer configurable.

[dogma]

Still not working.  The only firmware working for me is 1.02.  All the other ones would crash.

I'm trying 1.10 with one wireless PC (Windows XP, D-Link N card), everything default except a static IP and a new SSID.  The wireless PC just couldn't connect.  Router log says "Wireless system with MAC address 001B1154983B disconnected for reason: AP maybe crash...".

The triangle light blinks every second, the 3-circle light blinks rapidly, the wireless light is steady.

My wired PC works fine.

[mb]

Still not working.  The only firmware working for me is 1.02.  All the other ones would crash.

What is the h/w ver: of your device?

[dogma]

My hardware version is A2.

I managed to get it working last night after hard-reseting the router and rebooting my wireless PC.  However, the router crashed some time during the night: the only connected wireless PC disconnected and other wireless PCs couldn't connect in the morning.  I power cycled the router and everything seemed to be working. Then the router crashed when I tried to copy a 50 MB file from a wireless PC to my wired PC.

I'm falling back to firmware 1.02.  Hope D-Link would spend more time on testing and fixing bugs. I'm using default settings and there's only one wireless PC with D-Link's own N card under Windows XP, yet the router crashes.  I just don't understand how you guys couldn't reproduce this.

[edelbeb]

My wireless connection rates get cut by about 50% with the 1.10 firmware (using DWA552 w/1.30 software as the wireless card) (router is A2 hardware).  My wired PC is in the basement, the wireless PC is on the second floor.

I switched back to the 1.05 firmware and my wireless connection speed returned to normal.  Conclusion:  The 1.10 firmware is probably not good for wireless connections over distance.  It was worth a shot anyway - your luck might be better.

[davevt31]

Have you tried the 1.3 drivers for the 552.  I have a 552 on floor right above router that is connecting at 270 rate with 100% signal.

[edelbeb]

I'm using the 1.30, not the 1.20's.  I edited my original message to correct my typo.  The router and upstairs PC are in opposite corners, separated by 2 floors.  the 1.05 firmware handles it fine.  The 1.10 firmware does not.