Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bigone]

I'm new with managed switches and therefore have some problems. Maybe it's a miss configuration or my knowledge is not good enough.
I try to connect two DGS 1500 with each other and I'm getting problems. If the connection is established and configured it's nearly impossible to use the internet. Sending a ping to the gateway gives me sporadic response and sporadic time out.

Till now I'm working with only one VLAN, but the number of VLANs will increase after the configuration works well.
I connected port 13 and 14 of switch one with port 2 and 3 of switch two. After that I configured a trunk. All four ports are in tagged mode. All other configurations are is default mode exceptional global settings like name, IP, time config etc
I tried a static and LACP configuration, same result.

Any idea?

[lystor]

Hi, bigone

I. Update firmware to 2.50.B008
http://forum.dlink.ru/viewtopic.php?f=2&t=92700

D-Link DGS-1500 User Manual -> Firmware Backup and Upgrade:
http://dlink-manuals.org/dlink-dgs-1500-20-28-28p-52-user-manual/28/


II. L2 Functions > Link Aggregation > Port Trunking :
1. Link Aggregation: Enable
2. Press Apply on the top of the page
3. Type: LACP
4. Ports: 13 and 14 on switch1 and port 2 and 3 on switch2
5. Press Apply on the bottom of the page

D-Link DGS-1500 User Manual -> IGMP Snooping:
http://dlink-manuals.org/dlink-dgs-1500-20-28-28p-52-user-manual/51/

[bigone]

Hi Iyster,

thank you for the answer. I've done it in that way and have installed the Firmware 2.50.B008 and thats the problem. After reinstalling the older firmware everything works fine.

Please have a look onto the ftp server, here you find a newer firmware release (version 2.51.B002):
ftp://ftp.dlink.de/dgs/dgs-1500-20/driver_software/

This should solve the problem, too said D-Link.

[lystor]

Please have a look onto the ftp server, here you find a newer firmware release (version 2.51.B002):
This should solve the problem.

Thanks for the information.