Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

Factory reset, reload FW, factor reset after that and set up from scratch using the wizard...
Use IE or FF to upload FW.

Hi guys. Sorry for not replying for a while. Somehow I forgot to enable notification for this topic so I didn't noticed you have replied to me FurryNutz.

So, my problem still persists. Every now and then I need to restart (unplug and plug again) DAP because if I don't do that people trying to connect to my Network 2 (the one transmitted from DAP) are not able to get an IP address from it. When I unplug/plug the DAP, everything works fine for a while, and then I need to do the same procedure.

So, you are suggesting doing a factory reset and setting it up from beginning?

Thanks

[Konekcija]

Hi FurryNutz, thanks for reply.

Could you please check the steps below so I can be sure I understand you correctly:

1) login to DAP administration > Maintance > System > Restore device
2) download the latest firmware from http://support.dlink.com/ and save it locally
3) login to DAP administration and load the previously downloaded FW
4) repeat step 1
5) use a wizard to set up DAP in Access Point mode

[FurryNutz]

Correct sir. 

[Konekcija]

Thank you sir.

Will let you know if this helped

[FurryNutz]

 

[Konekcija]

Hi FurryNutz.

Problems again

When I try to upload FW v2.14 to a DAP-1360 I got "Invalid upload action" error. Really don't know what to do more. Now I'm getting frustrated because of this. Can't get it to work at all.

Any further ideas?

[Konekcija]

Hm, it seems that I forced it work somehow.

So, the problem was updating a firmware using Internet Explorer. You should use Firefox instead (Chrome not as well).

I have upgraded my firmware from 2.11 to 2.14 and FOR NOW it seems all works fine. Obtaining IP address problem disappeared.

[FurryNutz]

Ya we see better use when using FF.

[FurryNutz]

Glad you got it working. Enjoy.