Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tman13]

hello i have a dlink DSL-2750U router with the following information :

H/W : V1
S/W : ME_1.03
Hardware: GAN9.ET235B-B
Region : Syria
firmware version date 04/01/2014-17:57:44

i have a problem that the LED light is always constant regardless of the existance of wireless transfers and also after several resets i have contacted the support via email and were given several sites to download the firmware from i found that the latest firmware is with the date of 23/5/2014 and it has a new wifi driver that was listed in the changelog word document at the my product's firmware support website and i think it might solve my wifi router issue but the firmware isnt the one displayed at either
the official dlink support page  http://www.dlinkmea.com/site/index.php/site/support?pid=232
or the support website tsd.dlink.com.tw
or the middle east ftp website http://www.dlink-me.com/ftp/DLink_ME/ADSL/DSL-2750U/ and this website has the oldest firmware

also the router sometimes crashes after booting from a long offtime period while having all the led lights on as normal but the interface 192.168.1.1 cant be accessed and only a reboot from the power button solves it

can you please help me by providing me with this latest illusive firmware so that my router can work like it should 

[FurryNutz]

Link>Welcome!

Have you followed this for doing FW updates?
>FW Update Process

Have you tried the following folder?
http://www.dlink-me.com/ftp/DLink_ME/ADSL/DSL-2750U/Firmware/

[tman13]

yes i have done both and the folder that is mentioned has older firmware that cannot be flashed and is dated as created in 2011

the problem is that the software described in the changelog of the tsd.dlink.com.tw page for my product is not the same as the one available for download on the site or any other site that i referenced above

and i think that the latest version may solve my wifi led button constant on and not blinking status because it contains as the changelog states a new wifi driver

[FurryNutz]

I see, you have a rev V1 modem, the v1.09 and .10 version are for Rev U1. I only see v1.03 for the V1 modem. This maybe the most current version.

[tman13]

yes but the problem is that there are 2 1.03_ME versions according to the changelog on the website tsd.dlink.com.tw with one dating to 1/4/2014 which is installed on my router and it fixes a 3g modem issue and another one named version 1.03_ME which has a new wifi driver and i can confirm from the router's firmware upgrade page that the firmware on my router and on the website is the older one dating to 1/4/2014 and i need the new one dating to 23/05/2014
i think the new one isn't uploaded to the website but does exist and if you can find it for me please i need it

the changlog for my router's model firmware exists on the following link and it starts immediatly to download a doc file :

http://tsd.dlink.com.tw/temp/PMD/13119/DSL-2750U%20V1%20FW%20ME_1.03Release%20note.doc

[FurryNutz]

Ok, thats something I don't have access to resources too. That will need to be addressed by D-Link for your region. The TSD site is the main HQ repository for all of D-Link so they would need to find the correct version and get it up loaded. I recommend that you contact D-Link for your region or if you really want to, contact someone at the Taiwan office to see if they can help you.

[tman13]

ah ok thanks for your help

[FurryNutz]

Let us know if you find out anything. Good Luck.

[newmoon]

H/W : V1
S/W : ME_1.03
Region : iran

i have same problem . WiFi led is solid green !
i think d-link method for naming modem firmware is poor ! its hard to find appropriate firmware and there is risk to break modem !

[FurryNutz]

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.

H/W : V1
S/W : ME_1.03
Region : iran

i have same problem . WiFi led is solid green !
i think d-link method for naming modem firmware is poor ! its hard to find appropriate firmware and there is risk to break modem !

[hatak55]

H/W : V1
S/W : ME_1.10
Hardware: GAN9.ET235B-B

tested woork 100/100

ftp://ftp.d-link.co.za/DSL/DSL-2750u%20%28White%29/Firmware/Hardware%20V/V1/

[FurryNutz]

Thank you for sharing the feed back. Hope it will help others.
Enjoy.