Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[iamgdv]

Please help: connection for wifi camera works for a while, then starts or shuts down, or reboot (sometimes with a red indicator, sometimes green). Access to the web camera is lost in network and out of the account on the Dlink.
The latest firmware. Reboot, and you tried to re-register.
Support does not answer.
What to do?
Thanks in advance ....

[FurryNutz]

What MFr and model is the main host router?

• What wireless modes are you using on the main host router?
• 2.4Ghz Routers only: Try single mode G or N or mixed G and N?

What distance is between the camera and main host router?

• Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
• Any other WiFi routers in the area that maybe causing interferences? Link> Use InSSIDer to find out. How many? Use v3, its free.
• What region are you located?

Please review:
Links>mydlink and Browser FAQ
DCS Cloud (L) Series Camera Configuration and Mydlink.com
mydlink.com and Java Application FAQ

[JavaLawyer]

Please help: connection for wifi camera works for a while, then starts or shuts down, or reboot (sometimes with a red indicator, sometimes green). Access to the web camera is lost in network and out of the account on the Dlink.
The latest firmware. Reboot, and you tried to re-register.
Support does not answer.
What to do?
Thanks in advance ....

The camera spontaneously reboots and powers down? 

[b4rtj4h]

I have the exact same issue with one (1) of the 3 DCS 932L rev A that I have.
Problem seems to be related to the power plug... cause when I switch the Camera's they all have the problem after a few days. Changing from Power Socked did the trick!

[robert-e]

I would be willing to wager pie and a cup of coffee that the electrical circuit that was giving problems had an appliance that uses a lot of start-up current when it starts (perhaps an air-conditioner, or a freezer/fridge).  That would cause a large voltage drop for a short time, and could reset the camera.
Or perhaps an inductive load is causing a voltage spike which could also reset the camera. 

Something to consider.

Regards,
Bob

[RYAT3]

Interesting thoughts Robert-e. I like it.

A ups device should keep them up.

[FurryNutz]

Good information. Something to keep in mind.