Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[HopelessRomantic]

good day. Please help on my problem with dap 1360. I will setup on my school building. I have no problem when i only connect one dap 1360 to my main as repeater. But when i connect the second dap 1360 as repeater i can't connect. Please help.

[FurryNutz]

Link>Welcome!

• What Hardware version is your DAP? Look at the sticker under the DAP.
• Link>What Firmware version is currently loaded? Found on the DAPs web page under status.
• What region are you located?

Are you connecting the 2nd DAP to the main host router? or the 2nd DAP to the 1st DAP?

Its recommended to only repeat a signal once. Also your main host router may not be supporting of two repeaters. You may need to LAN wire the DAP and it up as a stand alone AP.

These DAPs are designed for home use and may not be a good idea for a school or business.

[HopelessRomantic]

Thanks for the reply sir. I connect the second dap to dap 1. But i also tried in main router. Same result. No internet on all devices connected. What should i do sir?
Hardware ver f1
Firmware 6.05
Country is saudi arabia. Thanks.

[FurryNutz]

Have you swapped the 2nd DAP in for the 1st DAP an see if it works? Turn off the 1st DAP.

Do you get internet with just 1 DAP connected?
I don't think you can connect a DAP to the 1st DAP in repeater mode like a daisy chain. Only one repeater can connect to the main host routers wifi.

[HopelessRomantic]

Yes , there is internet when im using only one dap. Is it only dap 1360 can not be daisy chain? Or all repeater? What the best i can do sir?i have 3 dap 1360. + main router from stc afaq. Is this good ?------ main router> dap 1360 as ap> dap as repeater connected to dap ap?> and the last dap will connect to main router as repeater. Or it will work if i connect also to ap?  Thanks sir

[FurryNutz]

main router> dap 1360 as ap> dap as repeater connected to dap ap?> This should work.

You can't change any channels or modes on the 2nd DAP while in repeater mode. It's connected to the 1st DAP which sets the channels and modes that the 2nd DAP repeats. You can change the channels and modes ON the 1st DAP only.

[HopelessRomantic]

Ok bro . ill do your suggestion. But one thing bro, how many dap can i connect to dap 1 as repeater?  And is there no problem if they are the same channel (ap>repeater>repeater)?  But the dap 1 (ap) and main router is not in the same channel. Thanks again

[FurryNutz]

I can only presume that this configuration will not work for daisy chaining repeaters. Repeating only once.

Ok bro . ill do your suggestion. But one thing bro, how many dap can i connect to dap 1 as repeater?  And is there no problem if they are the same channel (ap>repeater>repeater)?  But the dap 1 (ap) and main router is not in the same channel. Thanks again

[HopelessRomantic]

Bro,How to daisy chain dap 1360 as repeater?  Is my idea right? Main router > dap 1 ap> dap 2 repeater. , dap 3 repeater connected to main router.

[FurryNutz]

NO, you can only repeat using one DAP connected to the one DAP that's operating in AP mode.

[HopelessRomantic]

Ok bro. I'll update you. Thank you very much.
Bro, what ap repeater that can you daisy chain? What dlink? tplink or linksys. Thanks for your time.

[FurryNutz]

Repeaters don't daisy chain.

[HopelessRomantic]

Please help sometimes my laptop and cellphone is no browsing when connected to repeater but i can ping website.

[FurryNutz]

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email or FB> https://www.facebook.com/mydlink?fref=ts.
Let us know how it goes please.