Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Jtomalley]

I have a notification on the iOS mydlink Home app that my DCH-S150 motion sensor's firmware requires upgrading before I can access it to adjust settings (such as notification schedules, etc.) but when I try to access the firmware upgrade, I get an error message saying "This upgrade needs you to be connected to your home WiFi network."

I AM connected to my home WiFi network. Help.

[mariodings]

Can you login to the device? And is the device in the same network range?
Is there a extra router in your network?

What version is your motion sensor?
Mine is Firmware External Version: V1.20 (version A1 Europe)
Firmware Internal Version: V1.20b10

Witch is strange because the latest version seems to be: Firmware Release notes missing 1.07 date 15-5-2015
http://www.dlink.com/nl/nl/support/product/dch-s150-motion-sensor?revision=deu_reva1#downloads

It also says "Do not upgrade wirelessly" 

[Jtomalley]

No, cannot log in to motion sensor. On same network; only one router. Can see it on the network via MyDlink online but cannot access its settings to check firmware version or upgrade. DCH-S150 has no Ethernet port so upgrades have to be wireless. Can see on mydlinkhome app but when I tap to upgrade firmware, it tells me I have to be on my home network, but I AM on my home network.

[toobster]

I just solved this issue and it seems that you have to re-install your unit.

I started the new unit guide in the app and  pressed the reset button on my Motion detection until it re-initializes, do the WPS bonding and THEN it started to update the firmware thru the app.

Works fine now but in app upgrade didn't seem to work.

[FurryNutz]

Can you set up the DCH to connect to the SSID name and PW instead of using WPS?

[Jtomalley]

I just solved this issue and it seems that you have to re-install your unit.

I started the new unit guide in the app and  pressed the reset button on my Motion detection until it re-initializes, do the WPS bonding and THEN it started to update the firmware thru the app.

Works fine now but in app upgrade didn't seem to work.

THIS WORKED! You're a lifesaver. Thank you.

[FurryNutz]

Glad it worked for you. Enjoy.