• February 22, 2025, 03:21:03 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DWA182 C revision on Windows 10 , can only get 802.11a  (Read 18875 times)

soryuuha

  • Level 1 Member
  • *
  • Posts: 7
DWA182 C revision on Windows 10 , can only get 802.11a
« on: May 15, 2016, 07:52:49 PM »
Hi, this is my first time buying dlink dongle

i have DIR-850L on WirelessAC mode, when i tried connecting to 5Ghz AP, I can only get 802.11a connection using latest driver (Driver (3.06.B04 Win  02/19/16)

http://support.dlink.com/ProductInfo.aspx?m=DWA-182

I even tried to force 802.11ac mode of the dongle, via device manager, still getting 802.11a connection

any idea on how to get 802.11ac , using DWA182, on Windows 10?

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DWA182 C revision on Windows 10 , can only get 802.11a
« Reply #1 on: May 16, 2016, 07:36:15 AM »
Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?

Try single mode N on 5Ghz and try single mode AC if it has this option.
Be sure to set WPA2/AES only. Try disabling WPA mode and see what modes the 182 connects at.

Let us know...
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

soryuuha

  • Level 1 Member
  • *
  • Posts: 7
Re: DWA182 C revision on Windows 10 , can only get 802.11a
« Reply #2 on: May 16, 2016, 10:58:34 AM »
Quote from: FurryNutz on May 16, 2016, 07:36:15 AM
Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?

Try single mode N on 5Ghz and try single mode AC if it has this option.
Be sure to set WPA2/AES only. Try disabling WPA mode and see what modes the 182 connects at.

Let us know...

router info..

DIR-850L    HW:B1    FW:2.06

region:MY

not sure about those option you mentioned, should be at device manager, or dlink wireless manager?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DWA182 C revision on Windows 10 , can only get 802.11a
« Reply #3 on: May 16, 2016, 11:06:20 AM »
On the router...

Region: MY=Malaysia?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

soryuuha

  • Level 1 Member
  • *
  • Posts: 7
Re: DWA182 C revision on Windows 10 , can only get 802.11a
« Reply #4 on: May 16, 2016, 11:14:36 AM »
Quote from: FurryNutz on May 16, 2016, 11:06:20 AM
On the router...

Region: MY=Malaysia?

i already forced 802.11ac on my 5Ghz wifi

no option to force wpa2 on router, but on windows, it is on wpa2&aes

yup malaysia.

p/s:windows is reporting 585Mbps

p/s2: i cant seems to run dwa182 on usb3.0 mode, but on the same port, my external hdd is running on usb3.0
Logged

soryuuha

  • Level 1 Member
  • *
  • Posts: 7
Re: DWA182 C revision on Windows 10 , can only get 802.11a
« Reply #5 on: May 16, 2016, 11:20:10 AM »
well im shocked..i swear it can connect to 802.11N 5Ghz previously

C:\Users\soryuuha>netsh wlan show drivers

Interface name: Wi-Fi 2

    Driver                    : Wireless AC1200 Dual Band USB Adapter
    Vendor                    : D-Link Corporation
    Provider                  : D-Link Corporation
    Date                      : 10/29/2015
    Version                   : 1030.2.731.2015
    INF file                  : C:\WINDOWS\INF\oem51.inf
    Files                     : 1 total
                                C:\WINDOWS\system32\DRIVERS\rtwlanu_Vista.sys
    Type                      : Native Wi-Fi Driver
    Radio types supported     : 802.11g 802.11b 802.11a
    FIPS 140-2 mode supported : No
    802.11w Management Frame Protection supported : No
    Hosted network supported  : No
    Authentication and cipher supported in infrastructure mode:
                                Open            None
                                WPA2-Personal   CCMP
                                Open            WEP-40bit
                                Open            WEP-104bit
                                Open            WEP
                                WPA-Enterprise  TKIP
                                WPA-Personal    TKIP
                                WPA2-Enterprise TKIP
                                WPA2-Personal   TKIP
                                WPA-Enterprise  CCMP
                                WPA-Personal    CCMP
                                WPA2-Enterprise CCMP
                                Vendor defined  TKIP
                                Vendor defined  CCMP
                                Vendor defined  Vendor defined
                                Vendor defined  Vendor defined
                                WPA2-Enterprise Vendor defined
                                WPA2-Enterprise Vendor defined
                                Vendor defined  Vendor defined
                                Vendor defined  Vendor defined
    Authentication and cipher supported in ad-hoc mode:
                                Open            None
                                Open            WEP-40bit
                                Open            WEP-104bit
                                Open            WEP
                                WPA2-Personal   CCMP
    Wireless Display Supported: No (Graphics Driver: Yes, Wi-Fi Driver: No)


C:\Users\soryuuha>
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DWA182 C revision on Windows 10 , can only get 802.11a
« Reply #6 on: May 16, 2016, 11:23:51 AM »
Interesting to not see N listed.

B and G modes are only supported on 2.4Ghz and A was supported on 2.4Ghz and 5Ghz however was dropped from 2.4Ghz a while back.

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

soryuuha

  • Level 1 Member
  • *
  • Posts: 7
Re: DWA182 C revision on Windows 10 , can only get 802.11a
« Reply #7 on: May 22, 2016, 05:43:22 PM »
Quote from: FurryNutz on May 16, 2016, 11:23:51 AM
Interesting to not see N listed.

B and G modes are only supported on 2.4Ghz and A was supported on 2.4Ghz and 5Ghz however was dropped from 2.4Ghz a while back.

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
tried regional support.

tldr they sucks, and driver from regional site isn't working, had to use US latest driver

EDIT:

latest results after forcing Win1064 latest US drivers on my PC

C:\Users\soryuuha>netsh wlan show driver

Interface name: Wi-Fi 2

    Driver                    : Wireless AC1200 Dual Band USB Adapter
    Vendor                    : D-Link Corporation
    Provider                  : D-Link Corporation
    Date                      : 10/29/2015
    Version                   : 1030.2.731.2015
    INF file                  : C:\WINDOWS\INF\oem51.inf
    Files                     : 1 total
                                C:\WINDOWS\system32\DRIVERS\rtwlanu.sys
    Type                      : Native Wi-Fi Driver
    Radio types supported     : 802.11n 802.11g 802.11b 802.11n 802.11a
    FIPS 140-2 mode supported : Yes
    802.11w Management Frame Protection supported : Yes
    Hosted network supported  : No
    Authentication and cipher supported in infrastructure mode:
                                Open            None
                                WPA2-Personal   CCMP
                                Open            WEP-40bit
                                Open            WEP-104bit
                                Open            WEP
                                WPA-Enterprise  TKIP
                                WPA-Personal    TKIP
                                WPA2-Enterprise TKIP
                                WPA2-Personal   TKIP
                                WPA-Enterprise  CCMP
                                WPA-Personal    CCMP
                                WPA2-Enterprise CCMP
                                Vendor defined  TKIP
                                Vendor defined  CCMP
                                Vendor defined  Vendor defined
                                Vendor defined  Vendor defined
                                WPA2-Enterprise Vendor defined
                                WPA2-Enterprise Vendor defined
                                Vendor defined  Vendor defined
                                Vendor defined  Vendor defined
    IHV service present       : Yes
    IHV adapter OUI           : [00 e0 4c], type: [00]
    IHV extensibility DLL path: C:\WINDOWS\system32\Rtlihvs.dll
    IHV UI extensibility ClSID: {6c2a8cca-b2a2-4d81-a3b2-4e15f445c312}
    IHV diagnostics CLSID     : {00000000-0000-0000-0000-000000000000}
    Wireless Display Supported: Yes (Graphics Driver: Yes, Wi-Fi Driver: Yes)




still missing 802.11ac on radio type support
« Last Edit: May 22, 2016, 06:00:52 PM by soryuuha »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DWA182 C revision on Windows 10 , can only get 802.11a
« Reply #8 on: May 23, 2016, 07:19:19 AM »
Does the driver from US work?  ???
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

soryuuha

  • Level 1 Member
  • *
  • Posts: 7
Re: DWA182 C revision on Windows 10 , can only get 802.11a
« Reply #9 on: May 25, 2016, 08:25:41 PM »
Quote from: FurryNutz on May 23, 2016, 07:19:19 AM
Does the driver from US work?  ???

it works, but as you can see, 802.11ac still missing..
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DWA182 C revision on Windows 10 , can only get 802.11a
« Reply #10 on: May 26, 2016, 06:52:06 AM »
Ya I know...
So if you set AC mode only on the main host router, does the adapter connect?

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

soryuuha

  • Level 1 Member
  • *
  • Posts: 7
Re: DWA182 C revision on Windows 10 , can only get 802.11a
« Reply #11 on: May 31, 2016, 12:07:11 AM »
Quote from: FurryNutz on May 26, 2016, 06:52:06 AM
Ya I know...
So if you set AC mode only on the main host router, does the adapter connect?
yup connected, but not on 892.11ac protocol
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DWA182 C revision on Windows 10 , can only get 802.11a
« Reply #12 on: May 31, 2016, 06:48:01 AM »
So even though you set up AC mode only on the main host router, the adapter still connected?
Can you determine which mode the adapter connected to?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.