Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Patrickthierry]

Hi,
I bought a second DCS 5222L but I can't install it.
I tried with the WPS and Ethernet cable.
Using WPS I can't say much but the camera and router don't pair.
Using Ethernet cable, the green light does not stay solid but blinking every 3-4 seconds.
I tried for 2 hours now! First camera was install in a minute!!!

Any idea what goes wrong?

[RYAT3]

Turn off first camera and try 2nd only.
Are these 5222lB's?

[FurryNutz]

Link>Welcome!

• What Hardware version is your DCS? Look at the sticker behind or under the camera.
• Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
• What region are you located?

What Mfr and model is the main host router?
What wireless modes are you using?

I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool as a troubleshooting step: 192.168.#.22 and .23  DHCP

Test cameras with uPnP and uPnP Port Forwarding both enabled on ALL cameras: DCS Cloud (L) Series Camera Configuration and Mydlink.com

Using the latest setup SW on mdlink.com?

Hi,
I bought a second DCS 5222L but I can't install it.
I tried with the WPS and Ethernet cable.
Using WPS I can't say much but the camera and router don't pair.
Using Ethernet cable, the green light does not stay solid but blinking every 3-4 seconds.
I tried for 2 hours now! First camera was install in a minute!!!

Any idea what goes wrong?